Land Rover Crankshaft Damper Pulley Remover

2.4L TDCI | V6 Petrol
SKU: ET1013L

Automotive


Designed to remove the crankshaft damper pulley and injection pump on Land Rover Defender (07-10).

Engine Code(s)

244DT

Vehicle Make Model Series Engine Code Engine Size Year Start Year End
Land RoverDefender130244DT2.4L20072012
Land RoverDefender90244DT2.4L20072012
Land RoverDefender110244DT2.4L20072012

303-1149

Engine Code(s)

244DT

Vehicle Make Model Series Engine Code Engine Size Year Start Year End
Land RoverDefender130244DT2.4L20072012
Land RoverDefender90244DT2.4L20072012
Land RoverDefender110244DT2.4L20072012
SKU ET1013L
Barcode # 9321280347724
Brand Automotive
Vehicle Make Land Rover

12 Months


More from this category


BMW Vanos / VCT Socket | 22mm |16 Pt

BMW Vanos / VCT Socket | 22mm |16 Pt

A special 16 point impact socket for the centring valve of the camshaft timing on BMW & Mini Vanos unit and Ford VCT modules.

  • 16 Point impact socket
  • 22mm dia
  • 1/2" Sq Drv

Crankshaft Front Oil Seal Tool Crankshaft Front Oil Seal Tool

Crankshaft Front Oil Seal Tool

Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.

  • First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
  • Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.

Crankshaft Locking Tool

Crankshaft Locking Tool

For 4 Cyl Pumpe Duse diesel engines (1.9L | 2.0L engine with 2 & 4 valve) with arrow at 12 o'clock position with round sprockets. Also suited to FORD, SEAT & SKODA 1.9L TDi PD 3 & 4 cylinder engines.

  • OEM Equiv: T10050

Flywheel Locking Tool

Flywheel Locking Tool

SKU: ET0212

Flywheel Locking Tool

For 1.0L 3 Cyl EcoBoost GDTi engines.

  • OEM Equiv: 303-1602

Flywheel Locking Tool

Flywheel Locking Tool

SKU: ET1374

Flywheel Locking Tool

This set locks / holds the flywheel in position to allow the release of the crankshaft pulley screws during timing belt replacement. It has the same functions as ET1574 but with the extra locking adaptors expanding its use on a larger model group in the Ford petrol & diesel engine range.

  • Applications across a wide range of Ford engines especially: Diesel 1.8TDdi / TDCi 2.0TDCi, Petrol: 1.6Ti-VCT | later 1.25L / 1.4L 16v Duratec
  • Adaptor lengths: 11mm | 29mm | 42mm

Ford / JLR Oil Pump Alignment Tool

Ford / JLR Oil Pump Alignment Tool

Oil pump locking tool for 2.0L, 2.2L, 2.4L, 3.2L diesel engines and 2.3L Duratec petrol engines.

Allows the oil pump to be removed / replaced in the same position (to ensure that the oil pump is not operating with excessive side loads).

  • Mondeo | Ranger | Transit (2.0 / 2.2 / 2.4 / 3.2 TDCi / TDDi / Di Duratorq)
  • OEM Equiv: 303-705 | 303-1093 (PSA 0198H)