Axle / Hub Nut Sockets

A 105mm 8-point axle nut socket commonly used to install the rear axle nut on Hino 11.9T truck axles.

• 105mm diameter
• 8 Point socket
• 1" Sq Drv

A 110mm 8-point axle nut socket commonly used on a range of Japanese and Asian heavy-duty trucks and buses for maintenance and repair of wheel-end components, especially for hub and bearing removal. Specific application for BPW 16T trailer axle caps.

• 110mm diameter
• 8 Point socket
• 1" Sq Drv

A 115mm 8-point axle nut socket commonly used to dismantle and replace the front end and rear wheel axle covers on Volvo trucks.

• 115mm diameter
• 8 Point socket
• 1" Sq Drv

A 70mm 8-point axle nut socket commonly used on a range of Japanese and Asian heavy-duty trucks and buses for maintenance and repair of wheel-end components, especially for hub and bearing removal.

• 70mm diameter
• 8 Point socket
• 1" Sq Drv

An 85mm 8-point axle nut socket commonly used on rear wheel axle nuts (differential / drive axles) on Mercedes, MAN, Kenworth trucks.

• 85mm diameter
• 8 Point socket
• 1" Sq Drv

A 90mm 8-point axle nut socket commonly used on a range of Japanese and Asian heavy-duty trucks and buses for maintenance and repair of wheel-end components, especially for hub and bearing removal.

• 90mm diameter
• 8 Point socket
• 1" Sq Drv

A 95mm 8-point axle nut socket commonly used on a range of Japanese and Asian heavy-duty trucks and buses for maintenance and repair of wheel-end components, especially for hub and bearing removal. Also York axles on Scania.

• 95mm diameter
• 8 Point socket
• 1" Sq Drv

A specially designed tool to install / remove the wheel speed sensor. A time saving tool allowing for on vehicle servicing.

To extract, put the tool on the hub, then turn the screw until the speed sensor is removed. For reinstalling the speed sensor, place the speed sensor in position, then install the tool (until it is in the correct place).

• Application: Hino 11T trucks

This impact socket is part of Endeavour's specialty range of 1" Sq Drv 6 point thin wall impact sockets designed for truck servicing. Sizes cover an extensive range from 70mm through to 200mm.

• 115mm diameter
• 6 point
• 1" Sq Drv

A specialised axle nut socket for Iveco Eurotech Cursor trucks. Made from Chrome Moly steel, this socket is very durable, and suitable for use with impact / torque wrenches.

• Size: 105mm | 12 Point (across flats)
• Use with 36mm socket or spanner
• Chrome Moly construction
• OEM equiv: 99355180 (fits OE nut 7184036)

The ET4177 is an impact grade socket designed specifically for Iveco Daily rear hubs. Plus other applications requiring a 65mm diameter socket.

• 65mm thin wall impact socket
• 12 Point
• 3/4" Sq Drv

A specialised six (6) lug socket for fixing the adjustment on the bearing when servicing the truck drive axle nut on MAN TGA 460 axles, V9-82L-01 (disk brake / ABS). Use with a wrench or rod to hold the axle nut to loosen / tighten the bearing.

• 131.6mm outside dia
• Teeth width: 12.1mm
• 3/4" Sq Drv (or 60mm hex)

A specialised rear axle nut socket for Mercedes Actros trucks (HL / HL8 Hypoid).

• Inner size: 105mm | Outer size 125mm
• OEM equiv: W748589000700

Professional quality six internal teeth socket for removlng / installing the axle drive nut on Mercedes / MAN trucks.

• 100.5mm internal dia | 111mm outside dia
• 6 teeth (internal) | 11.5mm teeth width
• 3/4" Sq Drv

A specialised socket for fixing bearings when removing / installing the rear axle nut. Can be used with a torque wrench. Professional quality construction (SCM440 steel).

• 101.5mm inner dia | 110mm outer dia
• 12 Point
• 3/4" Sq Drv
• OEM Equiv: 740589000700

A rear wheel axle nut socket designed for Mercedes Benz 2636, 2640, and 414 trucks (model years 2006-2016). It features a 3/4" Sq Drv and is built for efficient removal of rear wheel axle nuts, making it an essential tool for heavy-duty truck maintenance.

• 98mm x 106mm x 12.3mm (see PDS for diagram)
• 3/4" Sq Drv

The ET1488B-120 is a ROR rear wheel hub nut socket designed for disc brake systems on ROR TM series trailers. It features a 1" Sq Drv, 8-point design, and a 120mm size, making it ideal for removing rear wheel nuts to facilitate bearing replacement.

• 120mm dia | 8 Points
• 1" Sq Drv

This impact socket is part of Endeavour's specialty range of 3/4" Sq Drv 6 point thin wall impact sockets designed for truck servicing. Sizes cover an extensive range from 70mm through to 200mm.

• 115mm diameter
• 6 point
• 3/4" Sq Drv

A specialised socket for dismantling the front / rear wheel axle cover on Volvo / Scania trucks. Part of the Endeavour range of specialised truck tools.

• Size: 115mm dia
• Flutes: 8 point
• Drive: 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 2-3/8" (60mm) opening | 6 Pt
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 2-5/8" (67mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 2-9/16" (65mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 3-1/2" (98mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 3-1/8" (79mm) opening | 6 Pt
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered Octagon 8 point nuts on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 3-13/16" (97mm) opening | 8 Pt
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 3-3/4" (95mm) opening | 6 Pt
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 3-7/8" (98mm) opening | 6 Pt
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 4-3/8" (111mm) opening | 6 Pt
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered Octagon 8 point nuts on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 4-3/8" (111mm) opening | 8 Pt
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 4-7/8" (124mm) opening | 6 Pt
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 4" (102mm) opening
• 98mm overall length
• 3/4" Sq Drv