VAG

A specialised kit for timing belt replacement on VW vans with 2.4D | 2.5D engines. The kit includes holding tools, locking pins and a 32mm tensioner pulley wrench.

• Applications: VW Crafter | Kombi | Transporter (95-03)
• Engines: 2.4D | 2.5D TDi (5 cylinder)

This timing kit has been designed for VAG vehicles with 1.6L | 1.8L turbo chain driven engines from 2003. The kit includes a chain tensioner locking tool, a tensioner locking tool, camshaft alignment tool, and two camshaft / crankshaft pulley holding tools.

• Engine: 1.6L | 1.8L FSI (03-08)

Used to lock the camshafts on 2.0L engines during cylinder head service. Use in conjunction with the T40080 camshaft adjuster socket.

• OEM Equiv: T10252

For holding camshaft at TDC during timing belt replacement or cylinder head reassembly. (PCD 515mm). Use with ET1105-4, ET1657, ET1205B & ET1297

• Engines: Audi 2.6L | 2.8L 12V V6 petrol (91-00)
• OEM Equiv: 3243
• Engine code: AAH | ABC (V6 2 valve engines)

Secures the position of the high pressure pump chain drive sprocket on engines without a mechanical vacuum pump.

• Engine codes: AXZ | BHK
• Applications: Touareg (06-10) | Audi Q7 (06-10)
• OEM Equiv: T10332

A specialised tool for locking the position of vibration damper and crankshaft sprocket when replacing the front crankshaft seal.

• Applications: VW T4 (2.4L | 2.5L) | T5

A specialised tool for loosening / tightening the central bolt. This tool counter holds the vibration damper.

Time saving tool due to the restricted space available.

• Application: EA839 engine (3.0L TFSI)
• OEM equiv: T40330

For crankshaft counter holder of the V-belt pulley / vibrator damper when replacing the timing belt or centre bolt on VW | AUDI 5 cylinder diesel engines (-19).

• Engines: 5 Cyl (97-) ABP | AEL | ATT

Locks the vibration damper (crankshaft pulley) when removing centre bolt - for 5 cylinder diesel (except Eurovan) with VR6 engine.

Also used when replacing the crankshaft oil seal flywheel and adjusting valve timing.

• Engine code: AAA
• Applications: VW VR6 (92-98)
• OEM Equiv: 3273

A specialised holding wrench for deep drawn water pump pulleys on VW and Audi engines with air conditioning. This wrench locks the water pump pulley for easy removal of pulley bolts.

A high quality tool made from drop forged Chrome Vanadium.

• Width: 65mm
• Length: 298mm

An essential tool for maintaining engine timing whenever the front vibration damper is removed. For instance, when replacing crankshaft oil seals.

Additional tools are required for replacing the engine timing chain (see ET0900 / ET9716).

• Application: 3rd Gen EA888 TFSI engines.
• OEM Equivalent: T10531