Timing Kits

A specialised kit for setting the balance shafts on common BMW (4 & 6 cylinder) | Mini | Citroen | Peugeot petrol engine vehicles.

• Engine codes: N42 | N45 | N46 | N46T | N52
• Engine codes: BMW 1.6 (N40 / N45 / N45T, B16, B16A, B16AC) 1.8 / 2.0 (N42 / N46 / N46T) 2.0 / 3.0 (N51 / N52 / N52-Component / N53 / N54), PSA: 1.4 / 1.6 16V (EP3 / EP6 / EP6DT / EP6DTS), Mini 1.4 / 1.6 (N12 / N14)

This kit is designed to service balance shaft on Citroen | Peugeot vehicles (and BMW Mini) with 1.4L | 1.6L petrol engines (chain) when the balance shafts have been disturbed.

Also suits BMW vehicles.

• Engine codes: N40 | N42 | N45 | N46 | N46T
• OEM Equiv: 11 4 360 | 115 140 | 11 9 280 | 11 9 330

For locking intake & exhaust camshaft at TDC plus crankshaft in position for removal of crank bolt. To adjust the camshaft timing, the cam chain tensioner must be removed & adjuster centre bolts loosened to allow the crankshaft & 2 cams to be turned independently of each other so timing can be set.

ALSO suitable for Peugeot 207, 308 & Citroen C4 with EP6 DT / DTS coded engines.

• Engine codes: BMW Mini N14 (R55 | R56) | PSA EP6DT / EP6DTS

A specialised timing kit for BMW & Mini engines. Designed to set camshaft / crankshaft timing on post 2014 1.5L | 2.0L diesel engines.

• Engine codes: B37 | B47
• Applications: Cooper D | Countryman (2014-)
• OEM equiv: 11 4 120 | 2 347 904 | 2 365 488 | 2 288 380 | 11 8 760 | 11 8 740 | 11 8 030

Comprehensive kit for valve timing on 1.4L | 1.6L valvetronic petrol engines. ALSO suits certain PSA engines.

An essential timing tool kit for BMW 1.4L | 1.6L petrol chain driven engines, as well as PSA vehicles with the EP3 | EP6 engines.

An inclinometer (ET9808) should be used in conjunction with this kit to check VVT mechanisms / chain stretch.

• Engine codes: N12 | N13 | N14 | N18 | EP3 | EP6
• Applications: BMW | BMW Mini | Citroen | Peugeot

A comprehensive kit for the W16 engine used on Minis (Chassis - R55 / R56 / R57), as well as certain PSA 1.6L diesel models.

• Engines codes: BMW Mini W16D: W16D16(9HZ) |W16D 16UO.
• Applications: Mini / Mini Clubman (07-10) | PSA vehicles fitted with 1.6D engines.
• OEM Equiv: 11 9 790 | 11 9 850 (11 9 851 | 11 9 852)

A specialised timing kit for BMW vehicles fitted with N47 | N57 engines. This kit includes a camshaft setting plate, flywheel locking pin, and crankshaft turning tool. Also included is a HP pump sprocket retaining tool (required when removing / installing the pump), and a crankshaft alignment gauge to properly align the crankshaft at bottom dead centre.

• Engine codes: N47 | N57

A new kit for timing late model chain driven twin camshaft diesel engines. The timing chain on these engines is located on the gearbox side at the rear of the engine.

These engines replace the older N47 | N57 series.

• Applications: B37 | B47 | B57
• OEM Equivalent: 113340 | 116480 |118760 | 2288380 | 2420824 | 2365488 | 2448914

A timing kit for the BMW Mini W10 / W11 1.6L petrol chain driven engines. Primary applications are pre 2009 Mini One | Cooper S models (including JC Works).

This kit enables the correct timing positions to be set on both the camshaft and crankshaft when replacing the timing chain.

• Engine codes: W10B16 | W11B16