Jamec Style Adaptor
1/2" Tail
SKU: 10031T8
TECHNICAL
These couplings have 2 tab buttons for a more secure lock.
The new 2008 release GENUINE SONSBEEK 320 Series Couplings have been designed for the Industrial market.
Quality and performance.
Precision manufactured components.
Thread sealant applied to all male threads.
Anti corrosive silver Nickel plated.
INTERCHANGEABILITY
JAMEC 310/320
WORKING TEMPERATURE
-10°C up to +80°C—Buna N Seal
OPERATING PRESSURE
Safe working pressure to 250 PSI / 17 BAR
APPLICATIONS
Compressed air and pneumatic applications, but where only LOW flow rates are required.
SPECIAL PRODUCT:
Being one of our most popular ranges it has been imperative to introduce a 320 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection.
ASK US FOR MORE DETAILS
| SKU | 10031T8 |
| Barcode # | 9335111001006 |
| Brand | Sonsbeek |
| Connection | Tail |
| Size | 1/2" |
| Style | Jamec Style |
| Type | Adaptor |
| Material | Steel |
Consumable
More from this category
Jamec Style Starter Kit
- 3/8" BSP adaptor
- 3/8" BSP coupler
- 15 - 18mm OTK style clips (2x)
Jamec Style Starter Kit
- 1/2" BSP Adaptor
- 1/2" BSP Coupler
- 17 - 20mm OTK style clips (2x)
Your browsing history
Brake Bleeder Adaptor | 36mm | 3 Lug
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Tesla S / X vehicles.
- Applications: Holden Colorado (2017-) | Ford Transit (2019-) | Mazda 3 (2015-) | Tesla S (2012-) / X (2015-)
- Nitto style connector fitting
- 36mm dia
- 3 Lug bayonet fitting
Master Cylinder Adaptor | 43.5mm / 3 Lug
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a number of Chrysler (Jeep) / Holden vehicles.
- Suits a range of Chrysler / Holden vehicles.
- Nitto style connector fitting
- Equivalent to ATE adaptor #22
- 43.5mm (11/16") OD
- 3 Lug bayonet fitting
Brake Bleeder Wrench | 10mm
A very convenient tool to use in conjunction with the ETWH505HA pressure brake bleeder. Use the wrench to open the nipple. Used brake fluid then flows through the hose (into any convenient disposal bottle). The one way valve prevents air from reentering the system.
- 10mm (6 point) brake bleeder wrench
- Silicone hose, with one way valve
Brake Bleeder Adaptor | Isuzu | 58mm
A specialised brake cylinder adaptor for use with pressure style brake bleeders. Part of the Endeavour range of brake bleeding tools.