Jamec Style Starter Kit
3/8" BSP
SKU: 100320T6KIT
- 3/8" BSP adaptor
- 3/8" BSP coupler
- 15 - 18mm OTK style clips (2x)
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
Jamec Style Adaptor | 3/8"
TECHNICAL
These couplings have 2 tab buttons for a more secure lock.
The new 2008 release GENUINE SONSBEEK 320 Series Couplings have been designed for the Industrial market.
Quality and performance.
Precision manufactured components.
Thread sealant applied to all male threads.
Anti corrosive silver Nickel plated.
INTERCHANGEABILITY
JAMEC 310/320
WORKING TEMPERATURE
-10°C up to +80°C—Buna N Seal
OPERATING PRESSURE
Safe working pressure to 250 PSI / 17 BAR
APPLICATIONS
Compressed air and pneumatic applications, but where only LOW flow rates are required.
SPECIAL PRODUCT:
Being one of our most popular ranges it has been imperative to introduce a 320 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection.
ASK US FOR MORE DETAILS
Jamec Style Coupler |3/8" T
TECHNICAL
These couplings have 2 tab buttons for a more secure lock.
The new 2008 release GENUINE SONSBEEK 320 Series Couplings have been designed for the Industrial market.
Quality and performance.
Precision manufactured components.
Thread sealant applied to all male threads.
Anti corrosive silver Nickel plated.
INTERCHANGEABILITY
JAMEC 310/320
ADVANTAGES
Twin tabs for more secure lock. Steel Valve Purple colour identification code
WORKING TEMPERATURE
-10°C up to +80°C—Buna N Seal
OPERATING PRESSURE
Safe working pressure to 250 PSI / 17 BAR
MAINTENANCE
Lubricate occasionally.
Not recommended for Dry air applications Refer to the Air breathing section
Do not connect directly to “Impacting” Air Tools Always use a impact absorbing leader hose
APPLICATIONS
Compressed air and pneumatic applications, but where only LOW flow rates are required.
SPECIAL PRODUCT:
Being one of our most popular ranges it has been imperative to introduce a 320 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection.
ASK US FOR MORE DETAILS
BACK BODY CASE HARDENED STEEL
VALVE BODY CASE HARDENED STEEL
SLEEVE CASE HARDENED STEEL
VALVE Steel
SPRING AISI 301
TABS AISI 420
SEALS Buna N
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
Jamec Style Adaptor | 3/8"
TECHNICAL
These couplings have 2 tab buttons for a more secure lock.
The new 2008 release GENUINE SONSBEEK 320 Series Couplings have been designed for the Industrial market.
Quality and performance.
Precision manufactured components.
Thread sealant applied to all male threads.
Anti corrosive silver Nickel plated.
INTERCHANGEABILITY
JAMEC 310/320
WORKING TEMPERATURE
-10°C up to +80°C—Buna N Seal
OPERATING PRESSURE
Safe working pressure to 250 PSI / 17 BAR
APPLICATIONS
Compressed air and pneumatic applications, but where only LOW flow rates are required.
SPECIAL PRODUCT:
Being one of our most popular ranges it has been imperative to introduce a 320 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection.
ASK US FOR MORE DETAILS
Jamec Style Coupler |3/8" T
TECHNICAL
These couplings have 2 tab buttons for a more secure lock.
The new 2008 release GENUINE SONSBEEK 320 Series Couplings have been designed for the Industrial market.
Quality and performance.
Precision manufactured components.
Thread sealant applied to all male threads.
Anti corrosive silver Nickel plated.
INTERCHANGEABILITY
JAMEC 310/320
ADVANTAGES
Twin tabs for more secure lock. Steel Valve Purple colour identification code
WORKING TEMPERATURE
-10°C up to +80°C—Buna N Seal
OPERATING PRESSURE
Safe working pressure to 250 PSI / 17 BAR
MAINTENANCE
Lubricate occasionally.
Not recommended for Dry air applications Refer to the Air breathing section
Do not connect directly to “Impacting” Air Tools Always use a impact absorbing leader hose
APPLICATIONS
Compressed air and pneumatic applications, but where only LOW flow rates are required.
SPECIAL PRODUCT:
Being one of our most popular ranges it has been imperative to introduce a 320 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection.
ASK US FOR MORE DETAILS
BACK BODY CASE HARDENED STEEL
VALVE BODY CASE HARDENED STEEL
SLEEVE CASE HARDENED STEEL
VALVE Steel
SPRING AISI 301
TABS AISI 420
SEALS Buna N
| SKU | 100320T6KIT |
| Barcode # | 9321280348431 |
| Brand | Sonsbeek |
| Size | 3/8" |
| Style | Jamec Style |
| Thread | BSP |
| Type | Combination |
| Material | Steel |
Consumable
Calculate Shipping
Flat Rate Shipping - $19.25
$19.25 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
You may also like
Nitto Style Starter Kit
- 1x 3/8" BSP Nitto style coupler
- 1x 3/8" BSP Nitto style adaptor
- 2x 15-18mm OTK style clip (to suit 3/8" internal hose dia)
Others also bought
Socket Holder Tray
Keep your sockets organised. Holds 14x standard | 14x deep sockets - 1/4" Sq Drv. Features sizes marked on top of the posts for easy identification.
- 4 - 15mm
- 1/4" Sq Drv standard | deep sockets
Socket Holder Tray
Keep your sockets organised. Holds 15x standard | 15x deep sockets - 1/4" Sq Drv. Features sizes marked on top of the posts for easy identification.
- 6 - 20mm
- 3/8" Sq Drv standard | deep sockets
Locking Clip Socket Carry Tray
Durable steel tray to organise and hold all your sockets.
With LOCKING CLIPS to hold sockets securely. Compact 45cm x 15cm size. And with handle to make it easy to carry around!
This socket tray is designed to carry 1/4" Sq Drv, 3/8" Sq Drv and 1/2" Sq Drv.
- 20x 1/4" Sq Drv clips
- 30x 3/8" Sq Drv clips
- 30x 1/2" Sq Drv clips
More from this category
Jamec Style Starter Kit
- 1/2" BSP Adaptor
- 1/2" BSP Coupler
- 17 - 20mm OTK style clips (2x)