Multimeter extension leads suitable for use with PowerProbe multimeters, and any multimeter using standard 4mm plugs.
- 10 foot red test lead
- 10 foot black test lead
- Old part # PNLS025-36RED | PNLS025-36BLK
SKU | PPTK0002 |
Barcode # | 9321280422346 |
Brand | Power Probe |
Consumable
Others also bought


Power Probe 5V Tip Adaptor
Connects to any Power Probe. Limits output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles. Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.


Power Probe Circuit Tracer & Short Finder
The ECT3000 Electrical Short and Open Finder makes locating shorts and opens quickly and more accurately than ever before. When the ECT3000 Transmitter is connected to an isolated circuit, it will quickly determine if the circuit has an open or if the circuit is shorted to ground. The ECT3000 receiver is designed to detect signals from the transmitter and its new adjustable distance indicator allows for accurate detection.
- Transmitter quickly determines if circuit has an open or if circuit is shorted to the ground.
- Receiver features a new adjustable distance indicator.
- Light bulb sockets for testing lighting systems. Plus probes / alligator clips.
- Works on 12-24V systems.


Silvertronic Probes | 2m Cable (2 Pce)
- IEC 1010 rating: 1000V CATIII double / reinforced insulation 20A
- Threaded contact
- 2.0m double insulated silicone cable
- Bi coloured layers
More from this category

20A Fuse Adaptor Lead | Maxi Blade
Break into the fuse panel quickly & easily. 4mm banana connectors. For use with standard multimeters.
- Maxi blade fuses
- 20A / 12 - 48V DC measuring range
- +/- 2% accuracy


Cigarette Cable Adaptor
Handy lead set that allows you to plug into the cigarette adaptor to read battery voltage etc.
Compatible with standard multimeter plugs.

Current Looper | Mini Fuse
A current looper for use with clamp meters for electrical circuit fault diagnosis.
- Suits mini type automotive fuses.
- Inline fuse holder for original fuse.
- For diagnostic testing.

Current Looper | Standard Fuse
A current looper for use with clamp meters for electrical circuit fault diagnosis.
- Suits standard automotive fuses
- Inline fuse holder for original fuse
- For diagnostic testing


Current Looper Set (2 Pce)
Use with clamp meters for electrical circuit fault diagnosis. An efficient way to monitor amperage draw through a fused circuit
- Inline fuse holder for original fuse

Fuse Adaptor Lead
Break into the fuse panel quickly & easily. 4mm banana connectors.
For use with stanadard multimeters
- Mini blade fuse
- 20A / 12-48V DC measuring range
- +/- 2% accuracy