The Sunflag FBS-300 is a robust, Japanese-made flexible shaft screwdriver attachment designed to tackle screwdriving tasks in the tightest, most awkward spaces. Whether you're working behind panels, inside cabinets, or around engine bays, this tool bends to your needs without compromising torque or control.

• 300mm flexible shaft
• 1/4" hex drive compatibility
• Includes double ended bit - #2 Phillips
• High torque capacity - 19.5Nm (tightening / 15.7Nm (loosening)

The Sunflag FB-19 flexible shaft can be used with any hand held driver (or light duty rechargeable driver). The shaft is double insulated making it easy to work by hand in tight areas. The flexible shank is workable up to a 75 degree angle. Be careful when using to undo screws not to apply excessive torque as this may damage the shaft.

• 180mm overall length
• Supplied with a double ended Phillips (#2) / Slotted (6.0mm) bit
• 1/4" hex drive

The Sunflag FBS-100 is a precision-engineered flexible shaft attachment set designed for tight spaces and tricky angles.

• 100mm flexible shaft extension
• Assorted bit selection includes Phillips / Slotted, specialty bits and a socket adaptor

The Air Boy 124140112 Blow Gun is a high-performance compressed air tool designed for cleaning, drying, and blow-off applications. Featuring a straight 300mm pipe, this blow gun provides extended reach, making it ideal for hard-to-access areas in workshops, garages, and industrial settings.

Built with impact-resistant acetal plastic, the ergonomic handle and large trigger ensure precise airflow control for efficient operation. With a maximum working pressure of 16 bar, this blow gun delivers powerful air output while maintaining low noise levels for user comfort.

Made in Denmark quality. Lifetime guarantee on the valve mechanism.

• Pipe length: 300mm
• Pipe dia: 8mm
• Inlet size: 1/4" BSP

The Air Boy 124140113 Blow Gun is a high-performance compressed air tool designed for cleaning, drying, and blow-off applications. Featuring a straight 500mm pipe, this blow gun provides extended reach, making it ideal for hard-to-access areas in workshops, garages, and industrial settings.

Built with impact-resistant acetal plastic, the ergonomic handle and large trigger ensure precise airflow control for efficient operation. With a maximum working pressure of 16 bar, this blow gun delivers powerful air output while maintaining low noise levels for user comfort.

Made in Denmark quality. Lifetime guarantee on the valve mechanism.

• Pipe length: 500mm
• Pipe dia: 8mm
• Inlet size: 1/4" BSP

Designed for tight spaces and delicate tasks, the Sunflag 100 Series Flexible Driver combines Japanese engineering with ergonomic finesse. Whether you're navigating around obstructions in electronics, automotive work, or DIY repairs, this tool delivers torque and control exactly where you need it.

• #1 Phillips
• 125mm flexible shank

Designed for tight spaces and delicate tasks, the Sunflag 100 Series Flexible Driver combines Japanese engineering with ergonomic finesse. Whether you're navigating around obstructions in electronics, automotive work, or DIY repairs, this tool delivers torque and control exactly where you need it.

• #2 Phillips
• 125mm flexible shank

Designed for tight spaces and delicate tasks, the Sunflag 100 Series Flexible Driver combines Japanese engineering with ergonomic finesse. Whether you're navigating around obstructions in electronics, automotive work, or DIY repairs, this tool delivers torque and control exactly where you need it.

• 5mm slotted
• 125mm flexible shank

• 7mm hex socket
• 150mm flexible shaft / 260mm OL

The Sunflag FB-19 flexible shaft can be used with any hand held driver (or light duty rechargeable driver). The shaft is double insulated making it easy to work by hand in tight areas. The flexible shank is workable up to a 75 degree angle. Be careful when using to undo screws not to apply excessive torque as this may damage the shaft.

• 180mm overall length
• Supplied with a double ended Phillips (#2) / Slotted (6.0mm) bit
• 1/4" hex drive

The Sunflag FBS-300 is a robust, Japanese-made flexible shaft screwdriver attachment designed to tackle screwdriving tasks in the tightest, most awkward spaces. Whether you're working behind panels, inside cabinets, or around engine bays, this tool bends to your needs without compromising torque or control.

• 300mm flexible shaft
• 1/4" hex drive compatibility
• Includes double ended bit - #2 Phillips
• High torque capacity - 19.5Nm (tightening / 15.7Nm (loosening)