A cup style oil filter wrench commonly used on BMW / Volvo vehicles. This is the primary size used for Volvos post 2000. Part of the Endeavour Tools oil filter removal range.

• 86.6mm x 16F x 54mm high
• 3/8" Sq Drv
• Torque: 25 /- 5Nm
• OE equiv: 9995679 | 9997499

An oil filter wrench for specific BMW models. Also suits later Volvo models (S40 | S70 | S80 | XC60 etc).

• Applications: BMW 318i (2001 onwards) | Also suits some newer Volvo models (XC60 | XC90)
• Engines: N20 | N26 | N51 | N52 | N54 | N55 | N63 | N74 | S55 | S63
• 86.6mm diameter | 16 Point
• 1/2" Sq Drv

The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

Manual type pressure tank to refill ATF on automatic transmissions without a dipstick. Includes 21 adapters for most common vehicles.

Tank with 6 litre / 1.5 gallon capacity, suitable for most transmissions - Audi, Ford, Holden, Mercedes, Nissan, Toyota, VW, and Volvo et c.

Specially designed tank base for feet to step on to stabilise the tank while pumping.

• Includes 21 adaptors

A professional quality adjustable oil filter wrench, with steel jaws to grip the filter / avoid slippage. One way design allows for loosening only.

• Adjustable 80 - 90mm
• Spring loaded design
• Use with 3/8" Sq Drv tools

A cup style oil filter wrench commonly used on BMW / Volvo vehicles. This is the primary size used for Volvos post 2000. Part of the Endeavour Tools oil filter removal range.

• 86.6mm x 16F x 54mm high
• 3/8" Sq Drv
• Torque: 25 /- 5Nm
• OE equiv: 9995679 | 9997499

A specialised oil filter wrench suitable for use with BMW motorcycles to remove / install the cartridge style filter. Part of the Endeavour Tools range of oil filter wrenches.

• 75mm diameter | 12 Points
• 3/8" Sq Drv
• OEM Equiv 114660 | 114661
• Suits 11 42 7 673 541 oil filter

An oil filter cup wrench with specific application to certain BMW vehicles. Part of the Endeavour range of cup filter wrenches.

• Application: BMW N62 5/7 Series V8 engines (2004>).
• 24mm dia x 30mm deep.
• 3/8" Sq Drv

A cup style oil filter wrench commonly used on BMW / Volvo vehicles. Part of the Endeavour Tools oil filter removal range.

• 86.6mm | 16F
• 1/2" Sq Drv
• Suits all Volvo models (99-06) except 40 & 50 series.
• BMW engines include N20 | N26 | N51 | N52 | N54 | N55 | N63 | N74 | S55 | S63

A set of six low profile cartridge style oil filter wrenches which suit a wide range of European vehicles, including those which use Mann Mahle & Knecht filters.

Designed for removing paper cartridge oil filter housing caps, and slotted canister style oil filters.

• 3/8" Sq Drv x 30mm OL
• Sizes: 24 | 27 | 32 | 36 | 38mm & 42mm round
• Applications include BMW | BMW Mini | Ford | Holden | Mercedes, and VAG diesel engines fitted with Mann Mahle & Knecht filters.