The Silvertronic Professional Multimeter Lead Kit is a premium-quality test lead set designed for use with standard digital and analogue multimeters. Featuring high-quality double-insulated silicone leads, this professional kit delivers exceptional flexibility, durability, and safety for technicians, electricians, automotive specialists, and electronics professionals.

Silvertronic's premium double-insulated silicone test leads are designed to meet IEC 61010 safety requirements and are rated to CAT III 1000V.

• Back probes
• Lantern probes
• Alligator clips
• 1.2m double insulated silicone leads

The Power Probe 3 with PowerFlowª Technology is built for technicians who need faster, more confident electrical diagnostics on 12V and 24V vehicle systems. It combines the trusted functionality of the Power Probe 3 with advanced circuit-loading capability, allowing technicians to measure voltage, apply battery power or ground, check resistance, activate components, and verify circuit integrity under real-world load conditions. With PowerFlowª, hidden faults such as high resistance, corrosion, weak grounds, and excessive voltage drop can be exposed quickly Ñ helping reduce guesswork, avoid unnecessary parts replacement, and speed up every diagnostic job.

• PowerFlowª Circuit Loading Technology - Actively load positive or negative circuits to test wiring under real operating conditions. PowerFlowª helps reveal voltage drop, high resistance, weak grounds, corrosion, damaged wiring, and poor connections that may not appear during standard no-load voltage testing.
• Apply Battery Power or Ground - Quickly supply 12V or 24V battery power or ground directly to components for fast functional testing. Ideal for checking motors, lights, relays and other electrical components.
• Resistance Measurement up to 25 k - Measure resistance to help verify component specifications, identify poor connections, and locate high-resistance faults caused by corrosion, damaged wiring, or component degradation.
• 10A Solid-State Circuit Breaker - The integrated 10-amp solid-state circuit breaker provides protection while supporting higher-load component testing. It allows technicians to power demanding loads with added confidence and automatic reset protection.
• Built-In Electronic Latch Function - Apply continuous power or ground without holding the actuator switch. This is especially useful for extended component activation, dynamic troubleshooting, and hands free testing.
• Quick-Connect Ground Lead - The ground connection uses a 4mm banana jack for improved flexibility and reliability. It allows the use of extensions, adapters, and test leads while maintaining a secure ground connection.

Three powerful diagnostic tools in one compact handheld unit! The Endeavour ET2300 combines a high-precision True RMS digital multimeter, 2 channel oscilloscope, and built-in signal generator, giving technicians and engineers everything they need to test, measure, and troubleshoot electrical and electronic systems faster and more efficiently. Designed for field service, automotive diagnostics, industrial maintenance, and electronics repair, the ET2300 eliminates the need to carry multiple instruments without compromising performance. CAT III 1000V and CAT IV 600V safety rating.

Featuring a bright 3.5-inch colour display, high-resolution measurement capability, and advanced waveform analysis functions, the ET2300 provides clear, accurate results whether you're diagnosing sensors, testing circuits, analysing signals, or verifying repairs. The integrated signal generator allows users to inject test signals directly into circuits, making fault-finding quicker and more effective. With its rugged portable design, rechargeable battery, and professional-grade functionality, the ET2300 is the ideal all-in-one tool for modern diagnostic work.

• 25,000 count true RMS multimeter
• 2 ch oscilloscope - 50mHz bandwidth / 280MSa/S sampling rate.
• Signal generator supporting 6 common waveforms
• CAT III 1000V and CAT IV 600V safety rating
• Rechargeable (Type C). Plus extensive premium lead set.

Not every vehicle or machine has an OBDII portÑbut that doesn't mean parasitic draw isn't a problem. From motorcycles and classic cars to forklifts, boats, and small equipment, battery drain can occur anywhere there is a battery and electrical system. The PPDRAWBATTERY adapter expands the capability of the Power Probe PPDRAW Draw Monitor, allowing technicians to diagnose parasitic draw directly at the battery using alligator clamps. The PPDRAW is sold separately.

By adapting the PPDRAW's OBD2 connection to battery terminals, the PPDRAWBATTERY makes it possible to use the same advanced parasitic draw diagnostic workflow on vehicles and equipment that lack an OBD port. This allows technicians to safely disconnect the battery while the PPDRAW keeps the system powered and continuously monitors current draw without resetting electronics or interrupting the circuit.

• OBD2 to Alligator Clamp Adapter Converts the PPDRAW's OBD2 connection to alligator clamps for direct connection to battery terminals.
• Use PPDRAW Without an OBD Port Enables parasitic draw testing on vehicles and equipment that do not have a diagnostic connector.
• Retains Full PPDRAW Functionality Maintains all memory saver and parasitic draw monitoring features when connected directly to a battery.
• Universal Application Ideal for motorcycles, ATVs, boats, forklifts, lawn equipment, classic vehicles, and other battery-powered machines.

This master timing kit is specifically designed for LDV 20L4E engines. Enables precise engine timing during service & repair. Locks camshafts / crankshafts in correct position. Supplied in a convenient storage case for easy organisation.

• Engine code: 20L4E
• Applications: LDV D90 | G10, MG GS (2016 - 19) | H5 (from 2019)
• OEM equiv: C00044503 | C00044505 | C000515091

Ideal for tool chests or any ferrous surface. Holds 12 spanners. Wall mount option.

• 12 Slots
• Magnetised

A handy spanner rack made from durable high impact plastic. With mounting holes. Neatly store combination, open end wrenches etc.

• 12 slots

A handy spanner rack made from durable plastic. With mounting holes. Neatly store combination, open end wrenches etc.

• 15 slots

Composite sharks teeth rack with magnetic strips. Holds 20 spanners.

• 20 Slots
• Magnetised

Made from TPR material, this organiser rack holds 15 wrenches. TPR is a softer plastic allowing wrenches to be held more securely, but still easily removeable.

This organiser rack is reverse facing. So when placed next to a standard forward facing organiser rack, the wrenches sizes still face towards you, while at the same time taking up less space in your toolbox.

A space saving design!

• Reverse facing
• Holds 15 wrenches
• Made from TPR material
• For use in toolbox or wall mounted

Made from TPR material, this organiser rack holds 15 wrenches. TPR is a softer plastic allowing wrenches to be held more securely, but still easily removeable.

This organiser rack is reverse facing. So when placed next to a standard forward facing organiser rack, the wrenches sizes still face towards you, while at the same time taking up less space in your toolbox.

A space saving design!

• Reverse facing
• Holds 15 wrenches
• Made from TPR material
• For use in toolbox or wall mounted