Test temperature & pressure of any vehicle AC system, including EVs.

Replaces manifolds & hoses! Diagnose air con systems remotely. Save time - fast setup.

View all parameters from one location - on either app, or the Kane gas analyser.

• 40 refrigerants including R134A, R1234yf & R410A
• Air Side displays return & supply measurements
• Easily set Evacuation & Rise tests values & timer
• Includes 2x wireless pressure probes / 2x wireless temperature probes

Accurately identify faults in the oxygen sensor and catalytic systems. 4 gas unit for petrol vehicles. Kane gas analysers - made in the UK - are market leaders. These compact, fully portable units, can be taken to the vehicle and used on test drives to log emission data.

• 4 gas (CO / CO2 / HC / O2 & Lambda / AFR) for petrol engines.
• Rechargeable battery
• Fast warm up
• Print to PC via wireless, or to Android App
• Updated model

Oil filter housing removal wrench for difficult to access oil filter covers on Ford Duratorq 2.0L & 2.2L TDCI engines (including Ford Mondeo). Ratcheting crowsfoot design for even faster action.

This wrench is designed to easily wrap around the inlet manifold allows for quick removal of the oil filter cap.

• 27mm | 12 Point
• OEM Equiv: 303-1579
• Applications: 2.0L | 2.2L Duratorq (DW10C / DW12C)

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar. This high pressure bleeder is compatible with electro-hydraulic braking systems that operate at a higher pressure than conventional systems.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.
• Adjustable pressure from 0 - 3 Bar.
• Powered by the vehicle's 12V battery
• Compatible with DOT 3 | DOT 4 | DOT 5.1 brake fluids

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

A pack of high quality Roloc style CDR discs. These discs are designed for use with Roloc style sanders. These discs are made from high quality felt.

• 2" diameter
• Felt material
• 10 pack

This test performs leak down tests which can be more accurate than normal compression tests.

Leak down tests can be used to detect various engine faults including leakage past rings, head gaskets, intake / exhaust valves etc.

• Requires air source of 70-160PSI, as the unit will pressurise system to 60PSI.
• Spark plus thread hoses: 10, 12, 14mm | regulator & o-rings

This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• CAT III 600V rating