Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.

• Potentiometer (variable resister) (1x)
• Signal tester / LED stroboscope (2x)
• Piercing probes (green / yellow)
• Test probe extension (2x)
• SRS (airbag) connector (1x)
• Crocodile clip adaptors (2x)
• Needle probes (4x)
• DMM test leads (2x)
• Banana plug extensions (4x)
• Flat terminals (8x)

The test lead of choice for professionals. Compatible with all standard multimeters. Made in UK quality.

• Red & black test leads - straight | right angled plugs
• Crocodile clips | cable piercers | back probes

A professional quality back probe kit from Silvertronic designed for when cable piercing is either not practical or permitted.

Silvertronic leads are made from double insulated Silicone making them both highly flexible, and also highly durable.

• Red / black test leads-right angled plugs (125cm long)
• Back probes - small (0.7mmm OD)
• Back probes - right angled

A manual type vacuum pump for extracting engine oil (and ATF / coolant) etc. Includes a 5.6mm OD suction probe which fits most dipstick tubes.

This kit is NOT suitable for extracting petrol / diesel fluids, as the sealants used in this kit are not fuel / solvent resistant.

• 6 litre tank capacity
• Plastic base to step on to stabilise the tank while pumping
• Conical pour spout for spill free waste oil discharge

Detect communication status of CAN and LIN lines both online / offline. Displays data, ID and baud rate.

• Automatic CAN High and CAN Low identification
• Automatic baud rate detection
• Voltage measurement below 20V - whether signal is a pulse or constant voltage
• Remote device - monitor signals remotely!
• 9V / CR2032 batteries included

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar. This high pressure bleeder is compatible with electro-hydraulic braking systems that operate at a higher pressure than conventional systems.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.
• Adjustable pressure from 0 - 3 Bar.
• Powered by the vehicle's 12V battery
• Compatible with DOT 3 | DOT 4 | DOT 5.1 brake fluids

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

Achieve perfect torque every time with this versatile and reliable torque adapter. The ET1234 Torque Adapter is a precision tool designed to prevent over-tightening of delicate components, such as plastic and aluminum oil filter canisters and filters, and sump plugs etc. It converts any 3/8" drive ratchet or breaker bar into a 25 Nm torque wrench, ensuring accurate tightening to manufacturer specifications.

• Accurate Torque Control: Converts any 3/8" drive ratchet or breaker bar into a precise 25 Nm torque wrench. Protect components from damage caused by over tightening.
• Durable Construction: Built with high-quality materials to ensure long-lasting performance.
• User-Friendly Design: Simple to attach and use with a 3/8" drive tool.
• Not for use with impact / pneumatic tools.

Discover the power of precision cleaning with ultrasonic cleaners! These cutting-edge devices use high-frequency sound waves to effortlessly remove dirt, grime, and contaminants from even the most delicate surfaces. Perfect for jewelry, eyeglasses, medical tools, and more, ultrasonic cleaners deliver professional-level results in minutesÑall from the comfort of your home or workspace. Say goodbye to tedious scrubbing and hello to sparkling perfection.

• Die cast 304 stainless steel tank
• 0-80¼C temperature range
• 1-99 minutes working time
• 60W ultrasonic cleaning power
• 40KHz for intensive rinse
• Tank size: 150 x 140 x 100mm
• Tank capacity: 2 litres
• Power supply: 220V / 50Hz

An essential glovebox / toolbox addition! One socket drives 4 common wheel nut sizes - saving both space and weight. Impact grade for use with both hand / impact tools.

Supplied with bonus extension bar.

• 6 point (single hex)
• Sizes: 17 | 19 | 21 |22mm
• 1/2" Sq Drv
• Impact grade