• Mandrel sizes: 8-32, 10-24, 1/4-20, 5/16-18, 3/8-16, 1/2-13

Perfect for connecting to fuel injectors, MAP and TPS sensors, as well as any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4mm plug whether shrouded or not. All probes are supplied in a protective plastic tube.

• 4 colours | 0.7mm (0.028") OD back probe pins
• Made in UK quality
• 1000V CAT III 20A

A professional quality circuit tester, with an LED display which provides real time voltage (in addition to indicating power (RED) and ground (GREEN)).

This unit has a fixed 90mm probe. See also ET3426A which is a similar tester, but with a standard 4mm connector.

• Spring cable extends to 3 metres
• 6V - 48V DC testing range
• Small testing current (<10mA)
• NOT for use with 240V AC | NOT for use with airbags

NEW DESIGN! The patented ring at the top of the sockets helps prevent breakage. As such, these sockets last up to 4 times longer than traditional thin wall wheel nut sockets. A plastic sleeve helps protects surfaces.

• 17 | 19 | 21mm diameter
• Thin wall construction
• Chrome Moly impact grade
• 1/2" Sq Drv

An essential diagnostic tool for testing potentially faulty electro mechanical relays. This tool tests both 12V / 24V relays, with four / five pins (not late model Ford 4 pin).

Simply plug the relay into the tester - using 12V vehicle power, the relay will be cycled 10 times with the tester applying a signal to the relay coil while checking the function of the internal contacts. The tester applies load to the internal contacts to detect excessive resistance.

• Quickly test 3 common types of electro mechanical relays
• Test relay coil resistance / relay contacts / cyclic testing
• Relay coil resistance: 20 - 500 Ohms
• Test voltage for coil: 9V
• Contact resistance threshold: 200 milliohms

Updated model with extra plate to fit virtually all passenger / commercial vehicles. Ratcheting handle with reversing switch makes it convenient to use in any position, and also centrally distributes force to prevent piston misalignment.

• Works on most single / multi piston calipers.
• Size range: 1-9/16" - 2-5/8"
• Includes magnetic 7" extended adaptor plates to suit multi piston calipers on heavy duty vehicles.

Heavy vehicles require higher capacity smoke machines. The new SmokeMan HD delivers up to 120 PSI max pressure. Test more than just engines. Check for leaks on small water tanks etc...

However, please note that smoke (mineral oil and / or UV dyes) must not be injected into braking systems.

• Both flow and pressure control
• Up to 120 PSI max pressure (compressed air required)
• Heavy vehicle adaptor set included
• Dual gauges - Test and System Pressure
• 12 month warranty

• Mandrel sizes: 8-32, 10-24, 1/4-20, 5/16-18, 3/8-16, 1/2-13

Plastic rivets are commonly used on car carpets, seats and trims. This set includes a gun for applying the plastic rivets, along with 40 plastic rivets.

Replacement rivets are available separately.

• 5mm x 15.8mm (10 pce)
• 6.6mm x 17.2mm (10 pce)
• 5mm x 17.2mm (10 pce)
• 6.3mm x 25.2mm (10 pce)

• Nutcerts: To 6mm
• Rivbolts: To 6mm
• Stainless Rivets: To 4.8mm
• Nose Pieces: 3/16", 3/32", 1/8", 5/32"