Quick, reliable diagnosis for all spark ignition systems, including Coil On Plug (COP) and general distributor type SPW.

Induction technology requiring no hook ups / ground wires / special adaptors.

Diagnose misfires, starting issues, damaged spark plugs / wires. Measure cylinder speed, ignition voltage, ignition time etc.

• Spark voltage (0-50,000V)
• Spark burn time (0-10ms)
• 200 to 19,999 RPM

Advanced detector using ultrasonic waves to detect leaks in a range of automotive / industrial applications. Tone generator to check for faulty seals in non pressurised enclosures.

• Detect vacuum / compressed air leaks (down to .13mm)
• Gas turbulence / with air / gas line blockages
• Electrical discharge due to insulation breakdown
• Mechanical wear in bearings, race assemblies etc
• Detect leaks in door seals, vehicle compartments etc

A stable power supply is essential when flashing / reprogramming / calibrating ADAS. This unit outputs 120A indefinitely, with variable voltage. Plus functions as a 120A battery charger.

Based in Kansas USA, Clore has a 50 year heritage in developing battery technology for automotive professionals.

• 120A battery stabiliser
• 12 / 24V operation
• 120A / 40A / 10A battery charging modes
• 13FT Cables
• 120A Max Output For Both Car / Truck Applications
• Extremely Low Peak To Peak Ripple Voltage
• Adjustable Voltage Output
• 7-Phase Battery Charging Sequence
• No Voltage Drop
• Lead Acid Plus Lifep04 Batteries

Next generation automotive signal generator - to simulate SENSORS and ACTUATORS.

Quickly detect whether the ECU, a feed, plug in connection, or sensor is defective. Eliminate faults without simply replacing parts on suspicion only.

• Operates on 12V & 24V systems
• Signal generator: sine, square, triangles and ramps; 0.1Hz - 20kHz
• PWM generator (up to 4A): Dynamic control of vehicle, actuators using pulse width modulation

Six channels of adjustable signal output. Drives all petrol / diesel injectors includ- ing PFI . FSI / TFSI / GDI / Piezo etc.

• Actuate injectors for cleaning
• Use with old PFI testers to test GDI

Professional quality for cleaning / testing petrol inejctors including new GDI type.

• Suits Low / High resistance PFI, GDI Peak & Hold and GDI Piezo
• Conduct sprayability and leakage tests
• Adjustable test voltage from 12V - 170V. Adj current from 3 - 20A. Maximum power: 150W
• Pulse width: 4,000 - 9,000uS
• Pressure: from 1 - 20 Bar
• 60W ultrasonic cleaner

Diagnose all type of IR (Infra Red) | RF (Radio Frequency) remote controls, including automotive key fobs and infrared controllers. Simply place remote control below the LCD screen, press the remote button, and the frequency will be displayed on the LCD screen.

• Applications include: Automotive key fobs, garage door remote controls, air conditioner remote controls etc
• Frequency range: 10Mhz - 1,000Mhz
• Powered by 9V battery (included)

All-in-one driver box to test all petrol injectors including the latest GDI Piezo injectors. Plus diesel injectors.

Ideal for bench testing injectors to see if they are opening correctly. Also use in conjunction with ultrasonic cleaners to better clean internal parts, or with injector nozzle tester to test spray pattern.

• Automatically detects injector type
• From 1Hz to 20Hz adjustable
• Supplied with 6 adaptors to connect to a fuel rail of a traditional petrol PFI injector tester
• Signal output cords for both petrol / diesel injectors
• Powered by 240V adaptor (not shown)

Professional tool for measuring tension on belt drives, including auxiliary / camshaft belts. Measures the vibration of the belt to assist with the correct installation of toothed / V belts.

• 10 - 600 Hz frequency range
• Refer to factory manuals for correct tension values
• Calibrate via mobile phone app
• 2 x AAA batteries included