This kit facilitates the replacement of the timing belt on the Chrysler DOHC common rail diesel engine fitted with / without balance shafts in the Voyager, Grand Voyager & LDV Maxus van by locking the crankshaft at TDC & camshafts in their timed positions.

• Engine codes: ENJ | ENR, SC28R150Q5 | SC25R136Q4
• Applications: Jeep Cherokee (01-08) | LDV T60 | V80
• For later model vehicles with a single camshaft sprocket, refer ET4370.

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

This tool is used to check for proper pin-fit and tension on US, European and Asian automotive electrical female terminals. This tool covers Japanese and Korean built vehicles including, Toyota, Honda, Mitsubishi, Mazda, Nissan, Subaru, Suzuki, Isuzu, Kia and Hyundai vehicles. This tool also covers US joint venture vehicles including Ford / Mazda, GM / Toyota, Ford / Nissan, and GM / Suzuki.

The tool is precision manufactured in the US. The tool has looped wires that are colour coded and the colour code chart is located on the packaging. The tool meets all RoHS requirements for all of the components and the finished product.

A must-have tool to properly diagnose electrical and electronic concerns on all common makes and models.

• Colour coded
• Made in USA
• Check socket fit condition

Say goodbye to the guesswork in electrical diagnostics. The ET7386 Short Circuit Diagnostic Kit is a professional-grade solution designed to streamline the process of tracing short circuits in automotive and electrical systems.

Manually Resettable Circuit Breaker Fuses: Includes 7 standard blade and 7 mini blade fuses ranging from 5A to 30A. These fuses trip like conventional ones but can be reset for repeated testing - no need to replace them after each fault.

• 7 standard blade / 7 mini blade resettable fuses
• Fuse ranges: 5A | 7.5A | 10A | 15A | 20A | 25A | 30A
• Includes 2x 300mm extension loops

Six channels of adjustable signal output. Drives all petrol / diesel injectors including PFI . FSI / TFSI / GDI / Piezo etc.

Ideal for bench testing injectors to see if they are opening correctly. Also use in conjunction with ultrasonic cleaners to better clean internal parts, or with injector nozzle tester to test spray pattern.

The kit also provides common adapters for most Direct Injection injectors to fit in the fuel rails of most traditional PFI injector testers, which is very common, for testing the injectors' spray-ability.

• Actuate injectors for cleaning
• Use with old PFI testers to test GDI
• Powered by 12V alligator cables

Professional quality for cleaning / testing petrol inejctors including new GDI type.

• Suits Low / High resistance PFI, GDI Peak & Hold and GDI Piezo
• Conduct sprayability and leakage tests
• Adjustable test voltage from 12V - 170V. Adj current from 3 - 20A. Maximum power: 150W
• Pulse width: 4,000 - 9,000uS
• Pressure: from 1 - 20 Bar
• 60W ultrasonic cleaner

Diagnose all type of IR (Infra Red) | RF (Radio Frequency) remote controls, including automotive key fobs and infrared controllers. Simply place remote control below the LCD screen, press the remote button, and the frequency will be displayed on the LCD screen.

• Applications include: Automotive key fobs, garage door remote controls, air conditioner remote controls etc
• Frequency range: 10Mhz - 1,000Mhz
• Powered by 9V battery (included)

Super sensitive stethoscope kit to quickly identify sources of noise, harshness or vibration.

Especially well suited for road testing / diagnosing simultaneously.

• 6 channel selector unit, with 6 pick up sensors
• Extra long cords
• Cushioned headphones

All-in-one driver box to test all petrol injectors including the latest GDI Piezo injectors. Plus diesel injectors.

Ideal for bench testing injectors to see if they are opening correctly. Also use in conjunction with ultrasonic cleaners to better clean internal parts, or with injector nozzle tester to test spray pattern.

• Automatically detects injector type
• From 1Hz to 20Hz adjustable
• Supplied with 6 adaptors to connect to a fuel rail of a traditional petrol PFI injector tester
• Signal output cords for both petrol / diesel injectors
• Powered by 240V adaptor (not shown)

Professional tool for measuring tension on belt drives, including auxiliary / camshaft belts. Measures the vibration of the belt to assist with the correct installation of toothed / V belts.

• 10 - 600 Hz frequency range
• Refer to factory manuals for correct tension values
• Calibrate via mobile phone app
• 2 x AAA batteries included