The Air Boy 124140113 Blow Gun is a high-performance compressed air tool designed for cleaning, drying, and blow-off applications. Featuring a straight 500mm pipe, this blow gun provides extended reach, making it ideal for hard-to-access areas in workshops, garages, and industrial settings.

Built with impact-resistant acetal plastic, the ergonomic handle and large trigger ensure precise airflow control for efficient operation. With a maximum working pressure of 16 bar, this blow gun delivers powerful air output while maintaining low noise levels for user comfort.

Made in Denmark quality. Lifetime guarantee on the valve mechanism.

• Pipe length: 500mm
• Pipe dia: 8mm
• Inlet size: 1/4" BSP

Automotive DMM with inductive pick up & K type temperature probe. RPM measurement, millisecond pulse duty cycle, dwell angle. Data hold & relative functions.

Supplied in a sturdy plastic case.

• IP67 dust and waterproof
• Fused current inputs and overload protection
• High contrast 4000 counts display with backlight
• 9V battery included

The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

A professional quality insulation tester with inbuilt true RMS multimeter. This tool is ideal for testing the insulation of the high voltage wires used on hybrid vehicles.

This tester conforms to EN61010 CAT III (1000V) and CAT IV (600V).

• IP67 waterproof rating
• Use as a standalone device, or link wirelessly to a computer to save / print results
• Supplied with high voltage probes, thermocouple and wireless USB cable.

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

Bluetooth Clamp Meter with Multimeter & Oscilloscope Functions

Connect up to three clamp meters to a single Bluetooth app! Ideal for diagnosing 3-phase EV motors. Offers advanced measurement capabilities with multimeter and oscilloscope functions, plus convenient data management features.

• Bluetooth Connectivity - Link up to 3 meters for simultaneous monitoring
• Rechargeable Battery - Long lasting power for field use
• 2.8" LCD Display - Clear, high resolution readout
• 38mm Jaw Opening - Suitable for large conductors
• Measurement Range:
• 1,000V AC/DC
• 1,000A AC/DC
• Resistance, Capacitance, Frequency, Duty Cycle
• Oscilloscope - 1 channel, 1kHz bandwidth, 5.0MSa/s sampling rate
• Data Features - Read offline recordings, view data charts, share recordings, and set threshold alarms for proactive diagnostics

Professional 600A AC, AC/DC True RMS Clamp Meter with Inrush current. These clamp meters provide fast A/D converting sampling time, high accuracy and all key features for measurement. Features a modern body and jaws design for perfect handhold and tight place testing. A clear backlit display is easy to see and a handy data hold keeps measurements on the display.

• 34mm jaw opening
• 600A current AC / DC
• 1000V voltage AC / DC
• 100ms inrush current
• Non contact voltage function

The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

Bluetooth Clamp Meter with Multimeter & Oscilloscope Functions

Connect up to three clamp meters to a single Bluetooth app! Ideal for diagnosing 3-phase EV motors. Offers advanced measurement capabilities with multimeter and oscilloscope functions, plus convenient data management features.

• Bluetooth Connectivity - Link up to 3 meters for simultaneous monitoring
• Rechargeable Battery - Long lasting power for field use
• 2.8" LCD Display - Clear, high resolution readout
• 38mm Jaw Opening - Suitable for large conductors
• Measurement Range:
• 1,000V AC/DC
• 1,000A AC/DC
• Resistance, Capacitance, Frequency, Duty Cycle
• Oscilloscope - 1 channel, 1kHz bandwidth, 5.0MSa/s sampling rate
• Data Features - Read offline recordings, view data charts, share recordings, and set threshold alarms for proactive diagnostics

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display