These specialised pliers are designed to remove the clutch pedal from the clutch master cylinder, when servicing either the clutch master cylinder or the clutch pedal.
These pliers compress the plastic holding clip on the end of the clutch master cylinder piston rod, allowing the pedal to be removed.
- Applications: Audi A1 (8X) | A3 (8P) | A4 (B7) | A6 (C6), Volkswagen Golf (1K1) | Passat (3B6) | EOS (1F)
T10005
DT 6202-B
| SKU | ET8356 |
| Barcode # | 9321280411364 |
| Brand | Automotive |
| Product weight | 0.3000kg |
| Shipping weight | 0.320000kg |
| Vehicle Make | VAG |
| Vehicle Make | Holden |
12 Months
More from this category
Audi Transmission Sensor Module Connector Tool
A specialised tool for removing the sensor module connector on 0B5 transmissions (7 speed DCT with wet clutch). To use, simply connect the socket to the housing, turn anti-clockwise, then remove the connector housing.
- Applications: 0B5 transmissions
- Vehicles: Audi A4 (08-) | A5 Cabriolet (09-) | Q5 (08-) | A5 Coupe (08-) | A5 Sportback (08-) | A7 Sportback (11-)
- OEM Equiv: T40228
BMW DCT Clutch Installer
A specialised tool to remove / install the dual clutch on GS7D36SG (DKG) transmissions.
- OEM Equiv: 23 0 400
BMW E90 / E91 Torque Converter Brace
For GA6HP19Z / GA6 HP19Z / GA6L45R gearboxes.
- E90, E91, E92, E93, E70, F20, F21, F22, F23 models, with N51, N52, N55, M57 engines
- OEM Equiv: 241370 | 83300495486
BMW Mini Clutch Alignment Tool
A specialised clutch alignment tool for installing new clutches in manual transmissions on BMW Mini vehicles.
Designed for use on SAC type clutches where larger tapered tools will not fit.
- Applications: Mini Cooper JCW/S (11-15) | JCW ALL4/S (11-16)
- Engines: N18 (1.6L petrol) | N47 (1.6L / 2.0L diesel) with Getrag 6 speed gearbox & SAC type clutch
- OEM Equiv: 210000 | 83300496779)
BMW SAC Clutch Mandrel Kit
A specialised kit for centering clutch discs on flywheels when installing self adjusting clutches (SAC). Designed to align the clutch disc before installing a self adjusting clutch.
Also suitable for aligning new / already pretensioned SAC clutches.
Also refer ET1733A
- Applications: S5D-200G | S5D-250G | S5D-260Z | S5D-310Z | S6S-420G | S6S-560G | GS6-37BZ | GS6-37DZ | GS6-53BZ | GS6-53DZ
- Sizes: 15mm dia x 23mm | 15mm dia x 26.5mm | 15mm dia x 28mm | 15mm dia x 32.5mm | 15mm dia x 34mm
- Centering sleeve: 15mm | 32.5mm
BMW SAC Mandrel | 15mm x 26.5mm
A specialised mandrel for centering clutch discs on flywheels when installing self adjusting clutches (SAC). Designed to align the clutch disc before installing a self adjusting clutch.
Also suitable for aligning new / already pretensioned SAC clutches.
- 15mm diameter x 26.5mm x 60mm (overall length)
- Suits transmissions: GS6-37BZ | GS6-37DZ