Foxwell Mercedes OBD Connector | 38 Pin
38 Pin
SKU: ET8000-02
This 38-Pin to 16-Pin OBD Diagnostic Adapter is designed specifically for older Mercedes vehicles equipped with the proprietary 38-pin diagnostic port. It allows you to connect Foxwell scan tools to pre-2001 Mercedes models, enabling access to engine, ABS, SRS, and other system diagnostics.
- Compatibility: Works with Mercedes models featuring the 38-pin OBD-I port (chassis types: 107, 124, 126, 201, 202, 210, 208, 170, 129)
- Adapter Type: 38-pin male (vehicle side) to 16-pin female (OBD-II scanner side).
- Diagnostic Access: Enables communication with multiple vehicle systems including engine, transmission, ABS, and airbags (SRS).
| SKU | ET8000-02 |
| Barcode # | 9321280376991 |
| Brand | Foxwell |
| Product weight | 0.2300kg |
| Shipping weight | 0.340000kg |
| Vehicle Make | Mercedes |
12 Months
More from this category
Advanced CAN Breakout Box 12V | 24V
A professional advanced breakout box for invehicle diagnostics / bench ECU testing, supporting both 12V / 24V systems.
More than just a basic breakout box - it exposes every OBD-II pin, monitors live voltages (true RMS), provides optional CAN termination, and supports safe, fast hookup of other diagnostic devices.
Key features:
- Universal compatibility: Works seamlessly with both 12V and 24V OBDII systems.
- VRMS Voltage Monitoring In Real Time: LCD displays true RMS voltage on all 16 OBDII pins. Visual feedback shows dynamic signals (green background), and immediately alerts for power / ground issues (pins 4 / 5 / 16)
- Built-In CAN Termination Switch: Applies a 120 resistance across the CAN pair to compensate for missing termination during single-ECU or small bench networks, improving signal integrity and reducing reflections.
- Voltage Protection & Alarm System: Features automatic audible alarms for high/low voltage deviations and reverse polarity protection. Supports a maximum load current of 2A.
Battery Clamp Cable
Replacement battery cable clamp for the ET2709 code reader / battery tester.
CAN Breakout Box 12V / 24V
An advanced CANbus circuit tester compatible with both 12V and 24V systems.
Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.
Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.
- Connect inline with scan tools, Or use with a multimeter / oscilloscope.
- Quickly diagnose CAN faults.
- Monitor battery voltage at the OBD port.
- A great way to log pin voltage data when used with our ET2504 multimeter.
