Fast / accurate current measurement at the fusebox. Plugs directly into the fuse box and can be used on mini, standard and maxi fuse connections.

• LCD display
• Hold / Peak functions (with bar graph) for detecting current surges.
• Range: 0 - 80A, 0 - 48V DC
• Accuracy: ±2%

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 330 x 270 x 150mm
• 40kHz frequency
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

An advanced CANbus circuit tester compatible with both 12V and 24V systems.

Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.

Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.

• Connect inline with scan tools, Or use with a multimeter / oscilloscope.
• Quickly diagnose CAN faults.
• Monitor battery voltage at the OBD port.
• A great way to log pin voltage data when used with our ET2504 multimeter.

This impact socket is part of Endeavour's specialty range of 1" Sq Drv 6 point thin wall impact sockets designed for truck servicing. Sizes cover an extensive range from 70mm through to 200mm.

• 115mm diameter
• 6 point
• 1" Sq Drv

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar. This high pressure bleeder is compatible with electro-hydraulic braking systems that operate at a higher pressure than conventional systems.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.
• Adjustable pressure from 0 - 3 Bar.
• Powered by the vehicle's 12V battery
• Compatible with DOT 3 | DOT 4 | DOT 5.1 brake fluids
• Auto shut off function.

Fast / accurate current measurement at the fusebox. Plugs directly into the fuse box and can be used on mini, standard and maxi fuse connections.

• LCD display
• Hold / Peak functions (with bar graph) for detecting current surges.
• Range: 0 - 80A, 0 - 48V DC
• Accuracy: ±2%

The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

A specialised socket for removing the mounting bolts on the axle of Mercedes Actros vehicles.

• Torx Plus EPL #32
• 50mm overall length
• Chrome Moly construction