This funnel can be molded into different shapes making it ideal to drain hard to reach oil filters.

This size is ideal for use with larger vehicles. A smaller size is available which is more suited for passenger cars (ET7267).

• Suitable for use with engine oil, brake fluid, ATF and coolant
• Size: 205mm x 556mm

Versatile kit with dies for crimping battery cables, balustrading wire, and swaging.

8T hydraulic crimping force for ease of use.

• Die Sizes: 6, 10, 16, 25, 35, 50 & 70mm² Swaging Die
• Overall length: 320mm

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

This high speed single action sander is designed to directly mount Roloc style CDR pads. A high quality compact unit, ideal for panel work.

We supply this sander with a bonus pack of 2" and 3" backing pads, and roloc style discs in fine / medium / coarse. The backing pads, and roloc discs are also available separately.

• Includes: 2" & 3" holders and bonus pads.
• Spindle Size 1/4-20 UNF
• Weight kg/(lb) 0.50/(1.10)
• Avg.Air Consumption CFM/(L/S) 2.5/(1.2)

A specialised set of Torx Plus bit sockets / impact sockets. Torx Plus fasteners are widely used in the automotive sector, and have a six lobe design, but with a different geometry than standard Torx sockets.

This kit contains 13 sockets from size TP10 - TP80, including TP50 / TP55 which are used with late model Subaru engines.

• 3/8" Sq Drv: TP10 | TP15 | TP20 | TP25 | TP27 | TP30 | TP40 | TP45 | TP50, 1/2" Sq Drv: TP55 | TP60 | TP70 | TP80
• 48mm overall length

A special wrench designed for removing / installing the oil mist separator on Fuso 380 trucks (over 17 ton). Also suits buses, including Mitsubishi Canter Eco4 (3.5 | 6.7 | 9 ton).

• Applications: Fuso 380 (engine code 6M70)
• Oil filter number: A66-GF30
• 109mm diameter
• 8 ribs
• 1/2" Sq Drv

A set of support hooks which are ideal for holding the brake caliper, during brake service, to avoid damaging the brake pipes. Also a great solution for hanging other test equipment, such as replenishment bottles.

• Protective coating to avoid damage.
• Solid steel construction | Non flexible
• 2 piece set

This funnel can be molded into different shapes making it ideal to drain hard to reach oil filters.

This size is ideal for use with larger vehicles. A smaller size is available which is more suited for passenger cars (ET7267).

• Suitable for use with engine oil, brake fluid, ATF and coolant
• Size: 205mm x 556mm