This kit helps clean / decarbonise the injector hole. Plus the seat cutters clean the bottom of the injector hole to allow proper setting of the new copper washer.

Helps avoid blow back due to poorly seated injectors.

• 3 seat cutters: 17mm flat | 17mm angled | 21mm angled
• Includes washer removal tool, injector blanking plugs (stop debris entering cylinders), wire brush cleaning set for chamber walls and centralising stem for correct cleaning seating angle

• 5/64-3/32-1/8-5/32-3/16-1/4-9/32-5/16-3/8-7/16

• 5x 107mm OL: Torx: T60, T70, T80, T90, T100
• 4x 107mm OL, Hex: 17, 19, 22, 24mm
• 4x 107mm OL, E-Torx: E18, E20, E22, E24
• 1x 3/4" Sq Drv, Hexagon Socket: 22mm
• 1x 1" Sq Drv, Hexagon Socket: 22mm
• 1x Hexagon L-Key: 4mm

Ideal for removing drive belts / tensioners in restricted areas. Long handle with extension that can be offset at another angle.

• Sizes: (3/8" Sq Drv) 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19mm

A professional grade in-hex metric impact socket, designed for use with air / powered tools. This socket has a 1/2" Sq Drv. Part of the Endeavour range of specialty bits and sockets.

• 10mm in-hex impact socket
• 78mm overall length
• 1/2" Sq Drv

A professional grade in-hex metric impact socket, designed for use with air / powered tools. This socket has a 1/2" Sq Drv. Part of the Endeavour range of specialty bits and sockets.

• 12mm in-hex impact socket
• 78mm overall length
• 1/2" Sq Drv