A specialised tool for removing the sensor module connector on 0B5 transmissions (7 speed DCT with wet clutch). To use, simply connect the socket to the housing, turn anti-clockwise, then remove the connector housing.

• Applications: 0B5 transmissions
• Vehicles: Audi A4 (08-) | A5 Cabriolet (09-) | Q5 (08-) | A5 Coupe (08-) | A5 Sportback (08-) | A7 Sportback (11-)
• OEM Equiv: T40228

Developed to remove and install the clutch cover with the sealing ring on the shaft, ensuring accurate alignment and a secure fit.

• Suitable for use with various BMW models, including the 2008-2014 M3, 135i, 335iS, F10 M5, and F12/3 M6 equipped with DCT transmissions

The ET1566A Clutch Installer is a specialised tool designed for the removal and installation of dual clutches, specifically engineered to be equivalent to OEM code 230400. This tool is essential for automotive professionals working with BMW GS7D36SG (DKG) transmissions.

• OEM Equiv: 23 0 400 (230400)

The ET1566C DCT Output Shaft Seal Tool is an essential tool for automotive professionals working with dual-clutch transmissions (DCT). This tool is specifically designed to facilitate the installation of the output shaft seal, ensuring a precise and secure fit

• Suitable for use with various BMW models, including the 2011-2014 135i, 335iS, F10 M5, and F12/3 M6 equipped with DCT transmissions

For GA6HP19Z / GA6 HP19Z / GA6L45R gearboxes.

• E90, E91, E92, E93, E70, F20, F21, F22, F23 models, with N51, N52, N55, M57 engines
• OEM Equiv: 241370 | 83300495486

A specialised clutch alignment tool for installing new clutches in manual transmissions on BMW Mini vehicles.

Designed for use on SAC type clutches where larger tapered tools will not fit.

• Applications: Mini Cooper JCW/S (11-15) | JCW ALL4/S (11-16)
• Engines: N18 (1.6L petrol) | N47 (1.6L / 2.0L diesel) with Getrag 6 speed gearbox & SAC type clutch
• OEM Equiv: 210000 | 83300496779)

A specialised expeller for 5 stud hub extraction with mechanical spindle, for BMW / Mercedes / other models with 5 stud hubs. Includes 5 conical washers.

• 96 - 126mm PCD
• SCM 440 material (HRC 35-40)

This is the master tool kit for replacing the oil seal of the BMW final drive input shaft. Used to remove the driveshaft nuts. This kit suits BMWs with the N54B30 engine.

• Engine code: N54B30
• Applications: BMW E70 | E90 | E90 | E92
• OEM Equiv: 335040 | 335050 | 335060 | 335070 | 335080

A professional quality reversible 3/8" air drill, supplied with a keyless chuck. Forward and reverse lever beside the trigger. Exhaust through the base of the handle.

• Reversible
• Keyless chuck
• Professional quality
• Free speed: 1,800 RPM
• Chuck size: 3/8"
• Avg air cons: 4 CFM

Drop forged chrome vanadium steel. Hardened hand honed cutting edges for easiest cutting. Heavy duty comfort grip handles.

• 200mm (8") overall length

For removing and installing bushes and bearings. The hydraulic cylinder helps save time and energy compared to manual methods.

Universal application.

• Includes M20 x P2.5 spindle
• Sleeve sizes: 18-60mm ID / 26-68mm OD, with 2mm increments