Perfect for connecting to fuel injectors, MAP and TPS sensors, as well as any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4mm plug whether shrouded or not. All probes are supplied in a protective plastic tube.

• 4 colours | 0.7mm (0.028") OD back probe pins
• Made in UK quality
• 1000V CAT III 20A

An essential set of 18 keys for draining sumps, axles, gearboxes, differentials etc. 3/8" Sq Drv.

• Hex: 8, 9, 10, 12, 14, 17mm
• Square: 7, 8, 10, 11, 12, 13, 14mm
• Square: 5/16" (male), 3/8" (male) | 10mm (female)
• Spline (Sec): M16
• Triangular: 10mm

This funnel can be molded into different shapes making it ideal to drain hard to reach oil filters.

This size is ideal for use with passenger vehicles. A larger size is available which is more suited for larger vehicles (ET7268).

• Suitable for use with engine oil, brake fluid, ATF and coolant
• Size: 170mm x 372mm

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system. This adaptor suits Ford / Mazda vehicles & Tesla model 3/Y.

This adaptor has a double o-ring design that seals to a depth of 14mm.

• Suits Ford / Mazda vehicles, as well as Tesla Model 3/Y (2017- ).
• Nitto style connector fitting
• Right angle connector
• Inner cap 36mm dia | Inner point to point 50mm (excluding lugs)
• 3 lug design
• Tesla OEM code: 1080578 00 C

An essential safety tool. Locks onto gas struts during vehicle service, to enable the struts to be fixed in an extended position. Universal application for all gas struts on boots, bonnets, hatch backs etc, as the clamp simply locks onto the strut's shaft.

• Aluminium body and brass tip to prevent damage to the lift support
• Magnet to hold the tool in place while securing the clamp
• For up to 13mm struts

An essential glovebox / toolbox addition! One socket drives 4 common wheel nut sizes - saving both space and weight. Impact grade for use with both hand / impact tools.

Supplied with bonus extension bar.

• 6 point (single hex)
• Sizes: 17 | 19 | 21 |22mm
• 1/2" Sq Drv
• Impact grade

A professional quality kit for removing aftermarket wheel lock nuts. This kit includes a wide range of sockets / bits for removing locking wheel nuts.

• See download link for detailed socket listing
• Made from Chrome Vanadium steel for added durability

A specialised master kit of pattern style wheel nut sockets for Audi vehicles. These are commonly used on late model Audi (post 2006) vehicles. Socket sizes are labelled to correspond with OEM sizing.

Do not use with an impact wrench.

• 22 pieces
• OEM equivalent T40073

A set of specialised locking wheel nut sockets for F series BMW vehicles. These sockets are essential for removing pattern style wheel nuts fitted to late model BMW vehicles.

Do not use with an impact wrench.

• Pattern style
• Applications: 1 Series F20 | F21, 3 Series F30 | F31, 4 Series F32 | F34 | F36, 5 Series F10 | F11, 6 Series F12 | F13, 7 Series F01 | F02 | F04
• 1/2" Sq Drv
• 20 Pcs

Special 1/2" Drive sockets for removing rim screws when locked with original BMW wheel rim lock fasteners

• 21 Teeth x 16.5mm Dia
• 17 Teeth x 14.5mm Dia
• 10 Teeth x 16.0mm Dia

Keep your BMW's wheels secure and serviceable with the BMW Lock Nut Socket Kit - a high-quality solution designed specifically for BMW vehicles equipped with spline style locking wheel bolts. These spline style keys are suitable for pre 2010 locking wheel nuts.

• Do not use with impact tools
• 17mm 1/2" Sq Drv master application socket.
• 20 wheel lock keys
• Standard: 7Pt | 8Pt | 9Pt | 10Pt | 11Pt | 12Pt | 13 Pt | 14Pt | 15Pt | 16Pt
• Tamperproof: 13Pt | 15Pt | 16Pt | 17Pt | 18Ppt | 19Pt | 20Pt | 21Pt | 22Pt | 23Pt