This tool is designed to cut the oil filter before recycling, in order to extract any residual oil.

The tool features a two bearing design, to make it easier to rotate the oil filter. The blade is made from a hardened SKH9 steel, while the body is made from an aluminium steel alloy for lighter / more durable construction.

• The cutter incorporates a longer body to allow the unit to be used to cut oil filters with a diameter from 60mm - 140mm.

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

A professional quality adjustable oil filter wrench, with steel jaws to grip the filter / avoid slippage. One way design allows for loosening only.

• Adjustable 80 - 90mm
• Spring loaded design
• Use with 3/8" Sq Drv tools

A cup style oil filter wrench commonly used on BMW / Volvo vehicles. This is the primary size used for Volvos post 2000. Part of the Endeavour Tools oil filter removal range.

• 86.6mm x 16F x 54mm high
• 3/8" Sq Drv
• Torque: 25 /- 5Nm
• OE equiv: 9995679 | 9997499

A specialised oil filter wrench suitable for use with BMW motorcycles to remove / install the cartridge style filter. Part of the Endeavour Tools range of oil filter wrenches.

• 75mm diameter | 12 Points
• 3/8" Sq Drv
• OEM Equiv 114660 | 114661
• Suits 11 42 7 673 541 oil filter

An oil filter cup wrench with specific application to certain BMW vehicles. Part of the Endeavour range of cup filter wrenches.

• Application: BMW N62 5/7 Series V8 engines (2004>).
• 24mm dia x 30mm deep.
• 3/8" Sq Drv

A cup style oil filter wrench commonly used on BMW / Volvo vehicles. Part of the Endeavour Tools oil filter removal range.

• 86.6mm | 16F
• 1/2" Sq Drv
• Suits all Volvo models (99-06) except 40 & 50 series.
• BMW engines include N20 | N26 | N51 | N52 | N54 | N55 | N63 | N74 | S55 | S63

A set of six low profile cartridge style oil filter wrenches which suit a wide range of European vehicles, including those which use Mann Mahle & Knecht filters.

Designed for removing paper cartridge oil filter housing caps, and slotted canister style oil filters.

• 3/8" Sq Drv x 30mm OL
• Sizes: 24 | 27 | 32 | 36 | 38mm & 42mm round
• Applications include BMW | BMW Mini | Ford | Holden | Mercedes, and VAG diesel engines fitted with Mann Mahle & Knecht filters.