A specialised kit designed to easily / quickly remove heavy duty yokes on drive shafts, rear end differentials and transmission without damaging the yoke or other adjacent components.
- Suitable for yokes with a bearing diameter between 1 7/8" and 2 3/16", including Spicer and Meritor series such as 1610, 1710, 1760, 1810, SPL 140, 170, 250, and Meritor (Rockwell) RPL 20 and 25 series
- Designed for use with 1" Sq Drv impact tools
- Generates over 25,000 pounds of pulling power, making it capable of handling even the most stubborn yokes
- Equivalent to Tiger 10803
| SKU | ET5504 |
| Barcode # | 9321280428591 |
| Brand | Automotive |
| Product weight | 5.8360kg |
| Shipping weight | 5.836000kg |
12 Months
Others also bought
Turbo System Leak Detector
Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks.
- Includes 3 pairs of stepped adaptors to fit most sizes found on commercial vehicles.
- Includes pressure gauge, shut off valve, and pressure release valve.
- Adaptor sizes: 105 - 130mm
Clore Battery Stabiliser 12
A stable power supply is essential when flashing / reprogramming / calibrating ADAS. This unit outputs 120A indefinitely, with variable voltage. Plus functions as a 120A battery charger.
IMPORTANT SAFETY NOTICE: This unit must be connected to a 15A circuit. The power cord supplied with the ET6102 must be used with this unit. This 15A cord has a larger earth pin.
Grinding down the earth pin to suit a standard 10A outlet or using an alternative cable with a 10A plug will damage the unit and void the warranty.
Based in Kansas USA, Clore has a 50 year heritage in developing battery technology for automotive professionals.
- 120A battery stabiliser
- 12 / 24V operation
- 120A / 40A / 10A battery charging modes
- 13ft Cables
- 120A Max Output For Both Car / Truck Applications
- Extremely Low Peak To Peak Ripple Voltage
- Adjustable Voltage Output
- 7-Phase Battery Charging Sequence
- No Voltage Drop
- Lead Acid Plus Lifep04 Batteries
More from this category
U-Joint Puller | Heavy Duty
An extra heavy duty puller for disassembling even the most seized U joints in minutes on virtually all heavy duty commercial vehicles.
This puller is engineered to be used with 1" Sq Drv impact tools. Reduces the risk of damage to driveshafts, yokes, joints and bearing cups.
To use, simply remove all bolts from the bearing cup. Slide the puller over the drive line yoke. Turn forcing screw clockwise with impact wrench.
- Application: U-Joints with bearing cups 1-1/2" - 2.2" OD.
- Ensure forcing screw is always lubricated.