A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. 40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 240 x 140 x 100mm
• 120W ultrasonic power / 100W heating power
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

An extra long prybar with tang thru design. Ideal for heavy duty automotive / industrial prying work. Features a comfortable rubber handle, with a hardened shaft.

• 940mm overall length
• Bent tip

This new addition to our Foxwell range combines an OBDII code reader, with a 12V battery tester in one convenient tool.

The OBDII code reader is compatible with all OBDII compliant vehicles, and reads / clears engine codes and turns off the Check Engine light. Plus the code reader has a built in trouble code database, and offers Automatic VIN recognition.

The 12V battery tester analyses the state of health on all common automotive batteries including AGM / Flooded / Gel batteries. Test reports can be printed via a PC.

• 100 - 1,100CCA battery range
• Lifetime free updates

An essential safety tool. Locks onto gas struts during vehicle service, to enable the struts to be fixed in an extended position. Universal application for all gas struts on boots, bonnets, hatch backs etc, as the clamp simply locks onto the strut's shaft.

• Aluminium body and brass tip to prevent damage to the lift support
• Magnet to hold the tool in place while securing the clamp
• For up to 13mm struts

A specialised tool for removing the sensor module connector on 0B5 transmissions (7 speed DCT with wet clutch). To use, simply connect the socket to the housing, turn anti-clockwise, then remove the connector housing.

• Applications: 0B5 transmissions
• Vehicles: Audi A4 (08-) | A5 Cabriolet (09-) | Q5 (08-) | A5 Coupe (08-) | A5 Sportback (08-) | A7 Sportback (11-)
• OEM Equiv: T40228

Developed to remove and install the clutch cover with the sealing ring on the shaft, ensuring accurate alignment and a secure fit.

• Suitable for use with various BMW models, including the 2008-2014 M3, 135i, 335iS, F10 M5, and F12/3 M6 equipped with DCT transmissions

The ET1566A Clutch Installer is a specialised tool designed for the removal and installation of dual clutches, specifically engineered to be equivalent to OEM code 230400. This tool is essential for automotive professionals working with BMW GS7D36SG (DKG) transmissions.

• OEM Equiv: 23 0 400 (230400)

The ET1566C DCT Output Shaft Seal Tool is an essential tool for automotive professionals working with dual-clutch transmissions (DCT). This tool is specifically designed to facilitate the installation of the output shaft seal, ensuring a precise and secure fit

• Suitable for use with various BMW models, including the 2011-2014 135i, 335iS, F10 M5, and F12/3 M6 equipped with DCT transmissions

For GA6HP19Z / GA6 HP19Z / GA6L45R gearboxes.

• E90, E91, E92, E93, E70, F20, F21, F22, F23 models, with N51, N52, N55, M57 engines
• OEM Equiv: 241370 | 83300495486

A specialised clutch alignment tool for installing new clutches in manual transmissions on BMW Mini vehicles.

Designed for use on SAC type clutches where larger tapered tools will not fit.

• Applications: Mini Cooper JCW/S (11-15) | JCW ALL4/S (11-16)
• Engines: N18 (1.6L petrol) | N47 (1.6L / 2.0L diesel) with Getrag 6 speed gearbox & SAC type clutch
• OEM Equiv: 210000 | 83300496779)