The ET2022A thermal imaging camera from Endeavour Tools is an essential tool for pinpointing thermal issues in vehicles with speed and precision. Whether you're diagnosing engine hotspots, checking exhaust systems, or inspecting electrical components, this compact thermal imaging camera delivers clear, actionable insights.

View thermal images in real time on a vibrant 2.4-inch color screen. The high-contrast display ensures clear visibility of heat signatures, even in low-light conditions under the hood or beneath the chassis.. Equipped with a long-lasting rechargeable lithium-ion battery, the ET2022A also keeps you powered through multiple inspections. USB-C charging ensures fast and convenient recharging between jobs.

• 240 x 240px thermal resolution
• USB-C Rechargeable / 2500mAh Li-Polymer battery
• 2.4" colour screen
• IP54
• -20°C to 500°C temperature range

Quick, reliable diagnosis for all spark ignition systems, including Coil On Plug (COP) and general distributor type SPW.

Induction technology requiring no hook ups / ground wires / special adaptors.

Diagnose misfires, starting issues, damaged spark plugs / wires. Measure cylinder speed, ignition voltage, ignition time etc.

• Spark voltage (0-50,000V)
• Spark burn time (0-10ms)
• 200 to 19,999 RPM

The Power Probe 4 is a multi-use Circuit Tester with built-in diagnostic power.

This tool simplifies the testing of fuse boxes, verifies correct operation of motors, lights, relays, sensors, wires, communications circuits and computer drivers. The large LCD colour display makes viewing live test information and mode selection simplified in even direct sunlight or complete darkness.

• Supplies Power and Ground
• Digital voltmeter with Min/Max voltage capturing
• 20 ft power lead
• Tests for bad grounds / short circuits
• Powered by vehicle battery
• Gold plated brass probe tip
• Directed LED head lamps to illuminate test area
• Ohmeter / Frequency
• Pulse width (+tive & -tive)

Additional diagnostic modes:

• Petrol fuel injection tester
• PCM / ECM driver tester
• Signal tracer (use with ECT3000)

The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

A pack of two optional dies for the ET5114 hydraulic crimper tool. These dies are commonly used for Deutsch crimps.

• #4 crimping die
• #8 crimping die

This product is designed for use in monitoring car battery voltage, leakage current, and serving as a backup power supply when replacing the battery. The product is connected to the car's OBDII interface via an OBDII connection cable to supply 12V power to the car and monitor the car system's leakage current for diagnosing various faults. It can also serve as a backup power supply for the car during battery replacement, preventing the car's mainboard from losing power and data. Draw Monitor can also monitor battery voltage through the OBDII port. Please read the instruction manual carefully before using the product.

• Supplies up to 10 amps
• Connects via OBDII
• View and record data via Bluetooth on App
• USB-C rechargeable
• Adjustable current output alarm & adjustable auto power off setting
• Graphing mode
• Monitor function input: 0-30V
• Voltage display accuracy: 1%+5dig resolution 0.1V
• Current display accuracy: 3%+5dig resolution 1mA

The ET2022A thermal imaging camera from Endeavour Tools is an essential tool for pinpointing thermal issues in vehicles with speed and precision. Whether you're diagnosing engine hotspots, checking exhaust systems, or inspecting electrical components, this compact thermal imaging camera delivers clear, actionable insights.

View thermal images in real time on a vibrant 2.4-inch color screen. The high-contrast display ensures clear visibility of heat signatures, even in low-light conditions under the hood or beneath the chassis.. Equipped with a long-lasting rechargeable lithium-ion battery, the ET2022A also keeps you powered through multiple inspections. USB-C charging ensures fast and convenient recharging between jobs.

• 240 x 240px thermal resolution
• USB-C Rechargeable / 2500mAh Li-Polymer battery
• 2.4" colour screen
• IP54
• -20°C to 500°C temperature range

Turn your Android phone into a fully functional thermal imager.

• 200 x 156 px sensor
• Thermal image snap & record. Share images easily
• -10¡ C to 330¡ C temperature range
• <9 Hz frame rate

The ET2022A thermal imaging camera from Endeavour Tools is an essential tool for pinpointing thermal issues in vehicles with speed and precision. Whether you're diagnosing engine hotspots, checking exhaust systems, or inspecting electrical components, this compact thermal imaging camera delivers clear, actionable insights.

View thermal images in real time on a vibrant 2.4-inch color screen. The high-contrast display ensures clear visibility of heat signatures, even in low-light conditions under the hood or beneath the chassis.. Equipped with a long-lasting rechargeable lithium-ion battery, the ET2022A also keeps you powered through multiple inspections. USB-C charging ensures fast and convenient recharging between jobs.

• 240 x 240px thermal resolution
• USB-C Rechargeable / 2500mAh Li-Polymer battery
• 2.4" colour screen
• IP54
• -20°C to 500°C temperature range