A specialised kit for replacing the teflon O-ring seals on Holden engines, and some Subaru engines.
The Hitachi SIDI system has 2 seals on the injector tip which must be installed into the grooves before the injectors are installed into their bores in the cylinder head. Newer injectors (2013>) from Bosch / Continental / Delphi have slightly larger injector tips.
This kit also includes a seal installer to drive the seal over the pilot and into the groove. And a sizer to compress each seal into its groove.
- Holden 2.0L | 3.6L engines (10-17) with Hitachi injectors.
- Holden 2.0L | 2.5L | 5.3L | 6.2L engines (12-17) with Bosch, Continental, Delphi injectors.
- Holden Colorado 7 (2016)
- Subaru 2.0L | 2.4L turbo engines (14-19).
Engine Code(s)
LF1
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Holden | Captiva | CG | LF1 | 3.0L | 2011 | 2012 |
| Holden | Commodore | VE | LF1 | 3.0L | 2009 | 2010 |
EN-49245
EN-51105
18683AA000
| SKU | ET1945A |
| Barcode # | 9321280411784 |
| Brand | Automotive |
| Product weight | 0.3000kg |
| Shipping weight | 0.300000kg |
| Vehicle Make | Holden |
| Vehicle Make | Subaru |
12 Months
Others also bought
Honda Oil Funnel
An oil filling funnel for Honda / Nissan vehicles. The funnel is designed to connect directly to oil filler necks, avoiding oil spills. Lower transparent chamber shows oil flows down to the engine.
Engine oil bottles can be put up side down - allowing a hands-free / one-person operation.
- Supplied with an extended 150 degree adaptor specially designed for Acura - MDX, RDX, ZDX, Honda Odyssey and Pilot.
- Also suits common Hyundai / Kia and Suzuki vehicles. Please see instruction manual for more details.
- M32 x P3.5 funnel thread
Power Probe Digital Clamp M
The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.
Supplied with 3x AAA batteries.
- Voltage: AC 600V | DC 600V
- Current: AC 80A | DC 80A
- Display 4000 counts
- Jaw Opening 24mm/0.9"
- Auto & Manual Ranging
- Auto Power Off / Non-Contact Voltage Detector
- Diode Open Voltage 3.2V
- Continuity Buzzer <50
- Data Hold
- Large LCD Display Backlight
- Work Light
- Low Battery Display
More from this category
Petrol Injector Cleaner
An effective / easy to use tool for cleaning peak & hold (not GDI) petrol injectors in an ultrasonic cleaner. Clean up to eight injectors simultaneously.
The cleaning process with this tool is to reverse the injectors usual flow so that any carbon build up is dispersed out to the top of the injector, ensuring all foreign particles are removed from the injector pintle and bore.- Reverses normal injector flow
- Injectors pulsed from 800 - 6,000 RPM
- Uses 12V power source.