An essential service kit for removing broken spark plugs. The key feature of the kit being that it removes the broken sleeve from the cylinder head.

In most cases, avoiding the costly need to remove the cylinder head.

• Engine: 5.4L V8 3V (Triton) | 330, Barra, Boss
• Applications: Ford Falcon | F-150 (04-08)

This spark plug hole thread chaser makes it easy to remove carbon, dirt, or straighten damaged threads in spark plug holes. Use with a deep socket, open end or box wrench.

• Tapered double ended design
• 10 x 14mm with 5/8Ò (16mm) hex

Sonsbeek non sealing type tyre chucks are designed to be used when the chuck is to be connected to a tyre inflator / gauged airline.

Our non sealing type chucks will not seal the chuck opening when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek non sealing type chucks are available in a range of different configurations. Where the chuck is to be connected directly to an airline, a sealing type chuck should be used.

• 1/4" BSP female inlet
• Clip On chuck
• Non sealing type

These levers are made from tough polycarbonate, for durability, while avoiding damaging paintwork when prying clips etc.

This set contains 6 handy levers, all 8" (200mm) long.

• Slim profile for removing dash trim, panels etc