This is the master tool kit for replacing the oil seal of the BMW final drive input shaft. Used to remove the driveshaft nuts. This kit suits BMWs with the N54B30 engine.
- Engine code: N54B30
- Applications: BMW E70 | E90 | E90 | E92
- OEM Equiv: 335040 | 335050 | 335060 | 335070 | 335080
Engine Code(s)
N54B30, N54B30A
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| BMW | 135i | E88 | N54B30 | 3.0L | 2008 | 2010 |
| BMW | 135i | E82 | N54B30 | 3.0L | 2008 | 2013 |
| BMW | X6 | E71 | N54B30 | 3.0L | 2008 | 2010 |
| BMW | Z4 | E89 | N54B30 | 3.0L | 2009 | |
| BMW | 335i | E93 | N54B30A | 3.0L | 2006 | 2010 |
| BMW | 335i | E92 | N54B30A | 3.0L | 2006 | 2010 |
| BMW | 335i | E90 | N54B30A | 3.0L | 2006 | 2010 |
| BMW | 335i | E91 | N54B30A | 3.0L | 2007 | 2010 |
| BMW | Z4 | E89 | N54B30A | 3.0L | 2010 | |
| N54B30A |
BMW Tail Shaft Differential
A specialised tool holds the driveshaft connecting nut. This is designed for use with the ET1653A.
- Engines: N20 | N52 | N54 | N55 | N57 | N63 | S63
- Series: F10 | F25
BMW Tailshaft Differential
An extension bar for use with the ET1651A / ET1652A holding tools.
- OEM equiv: 33 5 070 (335070)
BMW Differential Input Shaf
This tool is designed for installing the input shaft seal on the final drive.
- Applications: E70 | E71 | E72 | E82 | E84 | E90 | E91 | E92 | E93 | F12 | F13 | F20 | F25
Opened Jaw Spanner
A specialised tool to remove and install the drive shaft inner nut from the rear axle final drive.
Refer ET1653A for holding bar.
- Engine codes: E90 | E91 | E92 | E70
BMW Tail Shaft Differential
A specialised tool holds the driveshaft connecting nut. This is designed for use with the ET1653A.
- Engines: N20 | N52 | N54 | N55 | N57 | N63 | S63
- Series: F10 | F25
BMW Tailshaft Differential
An extension bar for use with the ET1651A / ET1652A holding tools.
- OEM equiv: 33 5 070 (335070)
BMW Differential Input Shaf
This tool is designed for installing the input shaft seal on the final drive.
- Applications: E70 | E71 | E72 | E82 | E84 | E90 | E91 | E92 | E93 | F12 | F13 | F20 | F25
Opened Jaw Spanner
A specialised tool to remove and install the drive shaft inner nut from the rear axle final drive.
Refer ET1653A for holding bar.
- Engine codes: E90 | E91 | E92 | E70
| SKU | ET1706A |
| Barcode # | 9321280379411 |
| Brand | Automotive |
| Vehicle Make | BMW |
12 Months
Calculate Shipping
Flat Rate Shipping - $19.25
$19.25 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
You may also like
BMW N54 Final Drive Input S
This master kit is designed for replacing the oil seal of the BMW final drive input shaft.
- Applications: E70 | E90 | E91 | E92
- Engine code: N54B30
Others also bought
Air Boy Sand Blasting Gun
The Air Boy Sandblasting gun is a handy, powerful tool that easily removes rust and ingrained dirt. The sand quantity and suction force is infinitely adjustable and easily regulated with the trigger, where the air pressure is used to ease the operation of the handle.
This sandblasting gun is supplied with a refillable 1.2L container.
- Removes corrosion, old paint, dirt, etc
- Adjustable nozzle makes it possible to regulate quantity of abrasive media.
- Max Working Pressure: 87-174 PSI (6-12 bar)
- Compressor requirement: 180 l/min / 2.5HP
Universal ATF Transmission Filler Kit
A must for all workshops. This ATF transmission fluid filler comes with a 15 pce adaptor kit (durable metal construction) giving it near universal coverage.
Air powered for faster / more convenient operation.- 15 pce metal adaptor kit includes VW DSG, VZ Commodore, Falcon
- Large 12.5L tank
Ford Crankshaft Puller Remover | 2.0L EcoBlue
A specialised tool for for the safe and efficient removal of the crankshaft vibration damper pulley on Ford 2.0L EcoBlue diesel engines fitted in the Ford Ranger | Kuga | Transit, from 2019.
Allows for safe removal without damaging the bonded rubber section. Ensure that thrust screws are suitably greased, in accordance with manufacturer specifications.
- OEM Equiv: 303-1657
- Application: Ford Ranger | Transit | Transit Custom
- Engine: 2.0L EcoBlue | YN2S
More from this category
ATF Adaptor | Audi DSG 7 Speed
A specialised twist type ATF adaptor for refilling Audi DSG transmissions that are not fitted with a dipstick.
Made from 6-6 Nylon material providing a lightweight, yet durable solution.
- Applications: Audi A4 (15-20) | A5 (16-20) | A6 (10-20) | A7 (10-20) | Q5 (08-20)
- 7 speed dual clutch gearboxes
- OEM Equiv: VAS 6617/12
ATF Transmission Filler
Designed for Honda vehicle with automatic transmission. Small end provides deep and narrow access.
- Bar dia: 10mm
- Bar length: 430mm
- Material: Aluminium bar | PVC tube
ATF Transmission Filler | Manual Type
Manual type pressure tank to refill ATF on automatic transmissions without a dipstick. Includes 21 adapters for most common vehicles.
Tank with 6 litre / 1.5 gallon capacity, suitable for most transmissions - Audi, Ford, Holden, Mercedes, Nissan, Toyota, VW, and Volvo etc.
Specially designed tank base for feet to step on to stabilise the tank while pumping.
- Includes 21 adaptors
ATF Transmission Filler Ada
Comprehensive adaptor kit for the ATF transmission filler. This kit includes 15 adaptors for popular vehicles including VW CVT / DSG transmissions.
This kit incorporates the 10 standard adaptors supplied with the ET4090A kit, plus five new additional adaptors (which are available separately in the ET4092 adaptor kit).
- For use with ATF filling kits, such as our ET4088 / ET4090A.
ATF Transmission Filler Ada
A comprehensive adaptor kit for use with ATF transmission fillers. Please see the download link for a full list of adaptors supplied.
These adaptors are designed for use on automatic transmissions without a dipstick.
- Includes the latest adaptor for VAG DSG 7 speed.
Audi DSG ATF Filling Tool | 7 Speed Trans
A new addition to the Endeavour Tools range of transmission filling tools. This specialised adaptor is designed for newer gearboxes that have a plastic fill plug.
- Applications: Audi A4 (15-20) | A5 (16-20) | A6 (10-20) | A7 (10-20) | Q5 (08-20)
- 7 speed dual clutch gearboxes
- OEM Equiv: VAS 6617/12