Volvo Fuel Tank Retaining Lid Removal Tool

OEM Equiv 999 7093
SKU: ET1555-1

Automotive


A specialised tool for removing / installing the retaining ring on fuel tanks on a range of Volvo vehicles.

  • C30 | C70 (06-) | s40 (04-) | S60 (11-) | S80 (07-) | V40 (13-) | V50 | V60 | V70 (08-) | XC60 | XC70 (08-)
  • OEM Equiv: 9997093

999 7093

SKU ET1555-1
Barcode # 9321280376380
Brand Automotive
Vehicle Make Volvo

12 Months


Others also bought


Promo
Adjustable Fuel Tank Wrench

Adjustable Fuel Tank Wrench

Adjustable jaws make this fuel tank locking ring remover applicable to a range of vehicles. Simply loosen the lock nuts on the tool, and adjust so that the slots fits over the teeth in the plastic ring on the fuel tank.

  • Adjustable 56 - 189mm range
  • Civic | Corolla + many other models
  • Use with 3/8" wrench

Promo
Power Probe Digital Clamp Meter

Power Probe Digital Clamp Meter

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

  • Voltage: AC 600V | DC 600V
  • Current: AC 80A | DC 80A
  • Display 4000 counts
  • Jaw Opening 24mm/0.9"
  • Auto & Manual Ranging
  • Auto Power Off / Non-Contact Voltage Detector
  • Diode Open Voltage 3.2V
  • Continuity Buzzer <50
  • Data Hold
  • Large LCD Display Backlight
  • Work Light
  • Low Battery Display


More from this category


Promo
Adjustable Fuel Tank Wrench

Adjustable Fuel Tank Wrench

Adjustable jaws make this fuel tank locking ring remover applicable to a range of vehicles. Simply loosen the lock nuts on the tool, and adjust so that the slots fits over the teeth in the plastic ring on the fuel tank.

  • Adjustable 56 - 189mm range
  • Civic | Corolla + many other models
  • Use with 3/8" wrench

BMW Fuel Level Sensor Lock Ring Tool BMW Fuel Level Sensor Lock Ring Tool

BMW Fuel Level Sensor Lock

Used to remove the fuel level sensor lock ring on BMW & BMW Mini models from 1998 - 2011. This is necessary in order to access the fuel filter.

  • Chassis codes: BMW E31, E34, E36, E38, E39, E46, E53, E60, E63, E64, E65, E70, E83, E85, E90, BMW Mini: R50, R52, R53, R55, R56, R57.
  • 1/2" Sq Drv

BMW Fuel Tank Wrench

BMW Fuel Tank Wrench

A specialised tool for removing / installing the metal fuel tank lid on selected BMW vehicles with N63 engine, and the chassis listed below.

  • Applications: BMW F01 | F02 |X3 chassis, with N63 engines.
  • See instruction sheet for detailed vehicle fitment.
  • OEM Equiv: 161190

Chrysler Fuel Pump Module Wrench Chrysler Fuel Pump Module Wrench

Chrysler Fuel Pump Module W

A specialised tool for removing / installing the fuel pump retaining ring holding the fuel pump module onto the fuel tank.

Fully adjustable for inside and outside grip, to fit most tank sizes.

  • Suits most 94 - 05 Chrysler vehicles, and 95 - 04 Jeep. Also some RAM trucks

European Fuel Tank Lid Remover European Fuel Tank Lid Remover

European Fuel Tank Lid Remo

A specialised tool to assist with removing / installing the fuel tank lid when servicing the fuel tank. This tool is applicable to a range of European vehicles including certain BMW, Mercedes models.

  • 145mm OD
  • Applications: BMW (E36 | E46), Mercedes (W203 | W211), Audi, Ford

Promo
Fuel Tank Locking Ring Tool

Fuel Tank Locking Ring Tool

A specialised fuel tank sender wrench for Kia vehicles. This wrench is also suitable for various BMW / Mercedes / Volvo diesel & petrol engines.

  • Applications: Holden Astra J (2010>), Mercedes W204 | W212, BMW F01 | F02 | F10 | F12, Volvo T4 / T5 (2010>) | S40 | V40
  • Hyundai | Kia: suits lock rings 31152 A9000 | 31152 J9000 | 31552 0W000.
  • Approx dimensions - 180mm (bottom tab to top tab) | 80mm (PCD of two top tabs)
  • 1/2" Sq Drv