Keep your sockets organised. Holds standard | deep sockets - 1/4" Sq Drv. Features sizes marked on top of the posts for easy identification.

A handy kit quickly / easily fill engine oil without spillage. This kit has a wide range of adaptors that screw on, and is suitable for vehicles with internal baffles or shields.

• 2 litre capacity
• Made from heavy duty polyurethane

A manual type vacuum pump for extracting engine oil (and ATF / coolant) etc. Includes a 5.6mm OD suction probe which fits most dipstick tubes.

This kit is NOT suitable for extracting petrol / diesel fluids, as the sealants used in this kit are not fuel / solvent resistant.

• 6 litre tank capacity
• Plastic base to step on to stabilise the tank while pumping
• Conical pour spout for spill free waste oil discharge

Specialised electrical disconnect pliers for push tab fittings commonly used on Fuel Injectors, Ignition Coils, Mass Airflow Sensors etc.

• Long length swivel jaws provide access to deep seated / hard to reach connectors
• Applications include Fiat | Mercedes | VAG

A specialised kit for removing / installing differential mounting bushes in BMW rear subframes.

A time saving tool allow for on vehicle servicing. Does not require the suspension to be disassembled, nor the complete removal of the subframe.

• Applications: BMW F01 | F02 | F06 | F06 | F10 | F11 | F13
• OEM bushes: 33316792873 (3331 6792 873)

A specialised servicing kit for differential mounting bushes in the BMW rear subframe.

A time saving kit, allowing for on vehicle maintenance of the differential mounting bushes at the front of the subframe This kit avoids the need to disassemble the suspension or for complete removal of the subframe (only lowering is required).

• Applications: E46 | E85
• Suits genuine bushes: 33176770788

A specialised tool designed for removing / installing differential mounting bushes in the rear subframe of BMW vehicles.

A time saving tool as it allows for on vehicle servicing, without the need to dismantle the suspension / remove the subframe.

• Applications: F01 | F02 | F06 | F07 | F10 | F11 | F13
• OEM Bushes: 3331 6792 873 (33316792873)

A specialised kit for the removal / installation of differential mounting bushes in the rear subframe.

This is a time saving kit as it allows for the on vehicle maintenance of the differential mounting bushes (#33176751808), without the need to disassemble the suspension / completely removel the subframe.

• Applications: E46 | E85

This kit contains the tools necessary to remove and install the rear axle carrier mount bushings on BMW E39 sedan and wagons.

A time saving kit as it allows for the replacement of the bushes without completely removing the sub frame assembly.

• OEM Bushes: 33311091422 (3331 1091 422) | 33311094036 (3331 1094 036)