Extract stubborn king / anchor pins. Including Scania 320 | 340 | 360 king pins.

Combination Budd wheel nut socket with dual hex / square sizing. Extra deep design for removal of nut / stud. Impact grade for use with impact wrenches.

• Budd wheel nut socket
• 17mm square (4Pt) x 35mm hex
• Impact grade (Chrome Moly)
• 3/4" Sq Drv

Connects to any Power Probe circuit tester, limiting output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles.

Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

• Current limited 5V output
• Safely test computer sensor circuits
• Provides 5V reference voltage
• 12 - 24V input
• 5V output
• Standard 4mm banana connector

Tufnut Security Nuts are engineered for maximum tamper resistance. Case hardened steel nuts which can be installed using regular tools, and are reusable.

Tufnut Security Nuts are engineered for maximum tamper resistance. Case hardened steel nuts which can be installed using regular tools, and are reusable.

The Power Probe Fuse Monitor is designed to locate / isolate which circuit parasitic draw lies by measuring current across fuses without removing them. The PPFUSE can be used on Maxi, Mini, & ATC fuses with a maximum Amp rating of 80A. The Fuse Monitor calculates amp draw based on fuse size in real time. The PPFUSE is USB-C rechargeable, comes with a belt clip, has replaceable tips, and a work light.

• Locate parasitic draw across fuses
• The top of the tool shows inactive, active, or open for quick fuse diagnosis
• Accurately measures current without removing the fuse
• Ability to read Maxi, Mini, & ATC fuses up to 80A
• Belt clip
• Flashlight
• Replaceable tips
• Pair with the PPDRAW monitor to quantify parasitic draw and use the fuse monitor to isolate the source
• USB-C rechargable (420mAh lithium battery)
• Live current reading display (A)
• Screen hold
• Screen brightness control
• Accuracy down to 1mA
• Magnetic backing
• Auto rotating screen
• Auto shut-off

Extract stubborn king / anchor pins. Including Scania 320 | 340 | 360 king pins.

A professional tool for removing / installing wheel bearing cups on trucks / trailers / other commercial vehicles with axle capacities from 11 - 50 Ton.

The tool is adjustable to fit most large vehicle applications. Precision engineered jaws grip the diameter of the cup, reducing the risk of damaging the bearing face.

Saves time & energy! One tool covers a broad diameter range - replacing individual bearing plates.

• Extends from 3-5/8" - 6-1/2" (92 - 165mm)
• Applications include: 453-X | BR563 | BR3720 | BR3920 | HM212011

The ET1066A-5 is a heavy-duty, universal front axle hub puller designed to remove front axle hubs from a wide range of commercial trucks without damaging components or requiring excessive force.

An extra-large universal flange plate fits 2, 3, 4, 5, and 6 stud hubs across Japanese truck models.

• 90 - 220mm range

A real time saving tool! A master wheel hub extractor for Japanese trucks (Fuso, Hino etc) and also European trucks such as Scania, Sauer and BPW.

This tool suits both front / rear axles, as well as trailer axles. Broader applications include drive axle, front steering and trailer hubs.

• Adjustable for bolt diameters from 110mm PCD to 448mm PCD.