Designed for removing the camshaft front gear wheel on M271 1.8L chain driven engines.

• Applications: M133 | M157 | M270 | M271 | M276 | M278
• Torx T100 (Sec) - 22mm across the points
• 98mm OL
• 1/2" Sq Drv

A special 2 pin tension lever for Audi / Skoda / VW vehicles. Also suitable for use with certain LDV vehicles.

• 18mm PCD
• 3mm pin diameter

This impact socket is part of Endeavour's specialty range of 3/4" Sq Drv 6 point thin wall impact sockets designed for truck servicing. Sizes cover an extensive range from 70mm through to 200mm.

• 115mm diameter
• 6 point
• 3/4" Sq Drv

A specialised socket for removing the mounting bolts on the axle of Mercedes Actros vehicles.

• Torx Plus EPL #32
• 90mm overall length
• Chrome Moly construction

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

Camshaft setting bars for locking the camshaft when servicing the camshaft timing chain on select Audi / VW vehicles. Commonly used in VW VR6 / W8 / W12 engines.

• OEM equiv: T10068A
• Use in conjunction with ET1105A-4

A specialised tool for loosening / tightening the central bolt. This tool counter holds the vibration damper.

Time saving tool due to the restricted space available.

• Application: EA839 engine (3.0L TFSI)
• OEM equiv: T40330

This camshaft turning socket is used to adjust the variable valve timing on the exhaust side camshaft to the basic position. Suits Audi 3.0L V8 40V petrol engines.

• Application: Audi S4
• Engine code: BBK
• 3/8" Sq Drv

This kit provides a comprehensive solution for safely turning crankshafts on both Audi V6 | V8 petrol engines.

This kit combines two separate OEM tools into the one kit.

• Applications: 2.5L | 2.8L petrol engines (from approx 2010) on A6 | A7 | A8 | RS4 | RS5 | RS6 | RS7 | S6 | S7 | S8.
• OEM Equiv: T40257 | T40272

A speclalised socket for turning over the engine.

• Application: RS5
• Engine 4.2L V8
• OEM equiv: T40257

• 6mm ball end hex key
• OEM Equiv: T10264