Injector blowback is a common problem with diesel engines. To remedy this, either a new copper washer needs to be fitted and / or the injector seat needs to be gently refaced before installing a new copper washer.

This tool is designed to easily remove / install copper washers in deep seated injectors.

To remove / install a copper washer, the protrusion of the split collet should be set according to the thickness of the seal to be removed / installed.

• 7mm ID | 230mm reach
• For deep seated injector seals

Packaged in a BMC, this circuit tester has a standard 4mm connector which can be used with standard multimeter probes.

Wire piercer / probes / alligator clip included.

• Not for use with airbags / vehicle computers.
• For use with DC voltage only.

Professional quality multimeter with oscilloscope functions

Fast A/D converting sampling time, built in data logging, and trend capture.

Bluetooth enabled, with App.

IP67 rated.

• 20MHz / 50MS/s bandwidth / real time sampling rate
• 320 x 240 px TFT colour LCD display
• CATIII 1000V / CATIV 600V
• Rechargeable battery

• Adaptor (1/4" Hex Sq Drv)
• For 1/4" hex insert bits