This kit is designed to remove high security BMW wheel lock bolts with spinning rings, where the bolt cannot be removed because the key is missing, or the bolt is rounded etc.

A faster solution than grinding / drilling, which is also more likely to result in damage to the wheel.

This kit allows the wheel lock bolt to be removed in a few minutes. A real timing saving tool!

• Slide hammer: M16 x 1.5

Vacuum gauge set contains precision gauges with individual damping control. Suitable for multi carburettor balancing with tubes / adaptors to suit most vehicles.

• 3-1/2" synchroniser gauges with fixed plates (4x)
• 750mm rubber hoses
• Extension tubes: 4x 52mm | 4x 122mm
• Cone type connectors: 8x 40mm
• Adaptors: 4x 53mm (M6 x 0.75) | 4x 60mm (M6 x 1.0)

A spring loaded clamp for repairing chains. Clamp behind the linkage - and use the forcing screw to remove the rivet pin.

• Suits #5 chain size
• Grind chain pin heads before use.

Comprehensive set of 15 flywheel pullers to separate the flywheel from the crankshaft taper. Screw into flywheel then apply force with centre screw.

Almost universal application for motorcycles.

• Thread sizes: M14 x 1.5 | M16 x 1.5 | M18 x 1.5 | M19 x 1.0 | M20 x 1.0 | M22 x 1.0 | M22 x 1.5 | M24 x 1.0 | M25 x 1.5 | M26 x 1.0 | M26 x 1.5 | M27 x 1.0 | M27 x 1.25 | M28 x 1.0 | M28 x 1.5