The test lead of choice for professionals. Compatible with all standard multimeters. Made in UK quality.

• Red & black test leads - straight | right angled plugs
• Crocodile clips | cable piercers | back probes

A spline style locking wheel nut key set for VW vehicles. These spline style keys are suitable for pre 2010 locking wheel nuts.

• 23 pieces
• OEM: T10101A, T40004

This kit is designed to remove high security BMW wheel lock bolts with spinning rings, where the bolt cannot be removed because the key is missing, or the bolt is rounded etc.

A faster solution than grinding / drilling, which is also more likely to result in damage to the wheel.

This kit allows the wheel lock bolt to be removed in a few minutes. A real timing saving tool!

• Slide hammer: M16 x 1.5

Aluminium construction allows these hooks to be moulded to any shape.

• Protective coating to avoid damage.
• Aluminium construction | Flexible
• 2 piece set

The all new eXact digital tyre inflator is the latest addition to our Air Boy range.

A sharp design, engineered for high precision, durability and optimum ergonomics. Measures up to 10 bar / 145 PSI.

• Highly accurate - 0.01 Bar. Pressure sensor recalibrates after each use! Supplied with individual test certificate.
• Durable - drop tested from 2m. With IP65 rating to protect against water and dust in harsh environments.
• QT connector - locks onto tyre valve preventing leakage / improving accuracy / easy one person use.
• Ergonomic design - large digits, backlighting, use either left / right handed. Lightweight for comfortable use.
• 2 year warranty

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

Monitor battery status on all 12V automotive batteries. Wireless communication (up to 50m) by RF frequency. No need for cables / mobile phone app!

• Solar powered with internal battery (or charge via USB)
• Battery status (SOC / SOH / Voltage) etc. Plus check vehicle starting / charging systems.
• Easy dashboard mount / audible alerts.

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.

Single handed brake bleeding. Powered by the vehicle's own battery. No shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.

A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.

• Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
• Print function via PC printer
• Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)