Injector blowback is a common problem with diesel engines. To remedy this, either a new copper washer needs to be fitted and / or the injector seat needs to be gently refaced before installing a new copper washer.

This tool is designed to easily remove / install copper washers in deep seated injectors.

To remove / install a copper washer, the protrusion of the split collet should be set according to the thickness of the seal to be removed / installed.

• 7mm ID | 230mm reach
• For deep seated injector seals

Injector blowback is a common problem with diesel engines. To remedy this, either a new copper washer needs to be fitted and / or the injector seat needs to be gently refaced before installing a new copper washer.

This tool is designed to easily remove / install copper washers in deep seated injectors.

To remove / install a copper washer, the protrusion of the split collet should be set according to the thickness of the seal to be removed / installed.

• 7mm ID | 230mm reach
• For deep seated injector seals

A specialised filter wrench to assist with removing / installing diesel fuel filters on Hino N04C engines (2019 onwards).

• 108mm dia | 4 Point
• 1/2" Sq Drv
• OE filter: 23383-78150>

A specialised filter wrench to assist with removing / installing oil filters on Hino N04C engines (2019 onwards).

• 50mm dia | 8 Point
• 1/2" Sq Drv
• OE filter: 15601-78140 | OE bowl: 15620-78140

Professional quality multimeter with oscilloscope functions

Fast A/D converting sampling time, built in data logging, and trend capture.

Bluetooth enabled, with App.

IP67 rated.

• 20MHz / 50MS/s bandwidth / real time sampling rate
• 320 x 240 px TFT colour LCD display
• CATIII 1000V / CATIV 600V
• Rechargeable battery