This holder firmly grips punches / chisel shanks of up to a 25mm diameter. Avoid injury due to missed strikes, by keeping knuckles safely out of the way.

• Nylon covered section of cover / nylon point on forcing screw helps provide a strong positive grip.
• 185mm overall length

A genuine Sunglag - made in Japan - automatic centre punch. Tool strikes a blow when pressure applied. Cap adjusts force of blow.

Simply adjust to desired spring tension. Then press firmly to generate an automatic centre punch. No hammer required for operation.

• Replacement tip available (AP-6).

Compact size with ergonomic grip. Children-resistant ignition for safety. The PT-200 Pro-Torch features an adjustable high BTU output flame.

The body, constructed of hi-tech polymers provides a sturdy yet lightweight feel. The internal brass and ceramic parts ensure precision operation and long life. Use this affordable tool in the shop, lab, kitchen, garage or wherever a reliable butane torch is required.

• Auto ignition
• Adjustable flame length
• Safety switch
• Up to 60 minutes use on each filling
• Uses standard butane gas

Replacement hardened steel tip for the #185 Sunflag auto punch.

When you need a professional, durable, dependable sprayer. Made in Europe quality...

• Acid wash / Ammonia based cleaners, including Mag Wheel cleaners, and Hy Clor liquid chlorine.
• Comes with 1.5L container

A stable power supply is essential when flashing / reprogramming / calibrating ADAS. This unit outputs 120A indefinitely, with variable voltage. Plus functions as a 120A battery charger.

IMPORTANT SAFETY NOTICE: This unit must be connected to a 15A circuit. The power cord supplied with the ET6102 must be used with this unit. This 15A cord has a larger earth pin.

Grinding down the earth pin to suit a standard 10A outlet or using an alternative cable with a 10A plug will damage the unit and void the warranty.

Based in Kansas USA, Clore has a 50 year heritage in developing battery technology for automotive professionals.

• 120A battery stabiliser
• 12 / 24V operation
• 120A / 40A / 10A battery charging modes
• 13ft Cables
• 120A Max Output For Both Car / Truck Applications
• Extremely Low Peak To Peak Ripple Voltage
• Adjustable Voltage Output
• 7-Phase Battery Charging Sequence
• No Voltage Drop
• Lead Acid Plus Lifep04 Batteries

Three-in-one leak detector solution - Air / smoke leak tests, Pressure decay and Vacuum leak (passive).

Compact, portable design with carry handle, and hook to hang it anywhere. Built in air compressor!

New 3.5" TFT colour display showing digital pressure, flow rate indication and real time test status.

• Use 12V vehicle battery as power supply
• Adjustable output pressure (0.5 - 20 PSI) for either EVAP or Turbo testing
• Supplied with comprehensive adaptor kit

The DA9083 Brass Drift Punch Set is a two piece set designed for automotive, industrial, and engineering applications. Manufactured from solid brass, these drift punches prevent damage to hard surface materials while offering non-sparking and non-marring performance. The set includes two punches (5/8" - 200mm & 3/4" - 200mm), each featuring hexagonal or knurled grips for superior handling.

• Starter: 5/8" x 8"
• Drift: 3/4" x 8"

The DA9082 Brass Drift Punch Set is a three piece set designed for automotive, industrial, and engineering applications. Manufactured from solid brass, these drift punches prevent damage to hard surface materials while offering non-sparking and non-marring performance. The set includes two drift punches (3/4" - 200mm & 3/4" - 300mm) and one starter punch (11/32" - 250mm), each featuring hexagonal or knurled grips for superior handling.

• Drift punches: 3/4" x 8" | 3/4" x 12"
• Starter punch 11/32" x 10"
• Hexagonal / Knurled grips

This holder firmly grips punches / chisel shanks of up to a 25mm diameter. Avoid injury due to missed strikes, by keeping knuckles safely out of the way.

• Nylon covered section of cover / nylon point on forcing screw helps provide a strong positive grip.
• 185mm overall length