Fast / accurate current measurement at the fusebox. Plugs directly into the fuse box and can be used on mini, standard and maxi fuse connections.

• LCD display
• Hold / Peak functions (with bar graph) for detecting current surges.
• Range: 0 - 80A, 0 - 48V DC
• Accuracy: ±2%

These colour coded gauges help identify brake lining that may require replacement. Quickly assess brake pad thickness on disk brakes, by inserting the blade between the brake disc and brake pad.

Traffic light like colour coding - Green / Go, Yellow / Caution, Red / Replace

• Colour coded metal gauges
• Measuring range: 2mm - 12mm

High speed / small body die grinder for demanding industrial applications where there is restricted access. Throttle lever with safety lock. Rear exhaust. Compact / lightweight / ergonomic design with made in Japan quality.

• Collet size: 1/4"
• Free speed: 25,000 RPM
• Air Consumption: 2.7CFM
• Optional collets: 1/8" | 3mm | 6mm

An essential diagnostic tool for testing potentially faulty electro mechanical relays. This tool tests both 12V / 24V relays, with four / five pins (not late model Ford 4 pin).

Simply plug the relay into the tester - using 12V vehicle power, the relay will be cycled 10 times with the tester applying a signal to the relay coil while checking the function of the internal contacts. The tester applies load to the internal contacts to detect excessive resistance.

• Quickly test 3 common types of electro mechanical relays
• Test relay coil resistance / relay contacts / cyclic testing
• Relay coil resistance: 20 - 500 Ohms
• Test voltage for coil: 9V
• Contact resistance threshold: 200 milliohms

Checks HT system. Simply set tester between the spark plug and lead. Start engine to obtain a quick and simple fault diagnosis.

• Male to HT lead connector
• Rubber connector

Checks spark to measure ignition voltage without removing spark plug. Simulates spark plug under compression load. For conventional and electric ignition systems.

Quickly locate faulty plug wires without piercing. Simply connect the inductive pick up onto the ignition lead. Light flashes indicating sound wire.