Professional quality (ISO 6789), with calibration certificate (±3% accuracy).

• 20-110Nm (15-81 Ft Lbs)

Professional quality (ISO 6789), with calibration certificate (±3% accuracy).

• 70-350Nm (50-250 Ft Lbs)

The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

Air Boy thrust guns provide a very high air flow, and offer a safe solution, as the nozzle is unblockable. The thrust nozzle increases airflow by 100% due to the venturi principle.

Air Boy thrust guns have a wide range of cleaning applications in commercial vehicles, trade and industry.

• Max 12 bar pressure
• 600 litres / min @ 8 Bar
• 98.2 dB @ 8 Bar

The Power Probe Fuse Monitor is designed to locate / isolate which circuit parasitic draw lies by measuring current across fuses without removing them. The PPFUSE can be used on Maxi, Mini, & ATC fuses with a maximum Amp rating of 80A. The Fuse Monitor calculates amp draw based on fuse size in real time. The PPFUSE is USB-C rechargeable, comes with a belt clip, has replaceable tips, and a work light.

• Locate parasitic draw across fuses
• The top of the tool shows inactive, active, or open for quick fuse diagnosis
• Accurately measures current without removing the fuse
• Ability to read Maxi, Mini, & ATC fuses up to 80A
• Belt clip
• Flashlight
• Replaceable tips
• Pair with the PPDRAW monitor to quantify parasitic draw and use the fuse monitor to isolate the source
• USB-C rechargable (420mAh lithium battery)
• Live current reading display (A)
• Screen hold
• Screen brightness control
• Accuracy down to 1mA
• Magnetic backing
• Auto rotating screen
• Auto shut-off

Simply convert your standard 3/4" flexible breaker bar, into a ratcheting breaker bar. This ratcheting head just goes on the end of any standard 3/4" Sq Drv breaker bar.

Professional quality breaker bar with ratcheting head. The ratcheting head has a three way mechanism - lock / right / left, and is rated to a maximum torque of 1,000Nm.

Made from heat treated drop forged CrV steel with a mirror chrome finish.

• 24" / 600mm long
• 1/2" Sq Drv

Take control of stubborn fasteners with the ultimate combination of torque and convenience. This 3/8" Sq Drv Ratcheting Breaker Bar is engineered for professionals who demand strength, flexibility, and efficiency in high-torque applications.

• Ratcheting Head Mechanism: Featuring a 72-tooth ratchet with a 5¡ arc swing, this breaker bar allows for precise control and continuous motion without liftingÑideal for tight spaces and awkward angles.
• Robust Chrome Vanadium Construction: Built to withstand extreme torque loads, the forged steel body offers exceptional durability and corrosion resistance for long-term performance.
• 180¡ Pivoting Head: Easily access fasteners from any angle with the fully adjustable head, giving you the leverage you need in confined or hard-to-reach areas.
• Replacement head available (ET1205H)

High quality flexible breaker bar made from heat treated drop forged CrV steel, with a corrosion resistant mirror chrome finish.

180 degree rotating head. Replacement heads available.

• 1/2" Sq Drv
• 30" (750mm) overall length