The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

Air Boy thrust guns provide a very high air flow, and offer a safe solution, as the nozzle is unblockable. The thrust nozzle increases airflow by 100% due to the venturi principle.

Air Boy thrust guns have a wide range of cleaning applications in commercial vehicles, trade and industry.

• Max 12 bar pressure
• 600 litres / min @ 8 Bar
• 98.2 dB @ 8 Bar

Remove guesswork from modern vehicle diagnostics by putting every OBDII circuit at your fingertips. This professional breakout box gives technicians instant access to every OBDII circuit for faster fault finding, ECU testing, and network diagnostics. Whether you're diagnosing communication faults, testing CAN bus systems, performing ECU bench testing, or verifying vehicle power and ground circuits, the ET3142 provides the visibility and control that standard scan tools simply can't offer.

Featuring a built-in LCD display with real-time True RMS voltage monitoring across all 16 OBD-II pins, the ET3142 allows technicians to instantly identify power supply issues, ground faults, CAN communication activity, and wiring problems without repeatedly probing connectors. Dynamic signal detection, audible voltage alarms, and ground status indicators help reduce diagnostic time and improve accuracy.

The integrated 120 CAN termination switches make the ET3142 an invaluable tool for ECU bench testing and module diagnostics. By providing proper CAN network termination, technicians can test modules off the vehicle with improved signal integrity and confidence. Compatible with both 12V and 24V systems, it is suitable for passenger vehicles, trucks, buses, and commercial equipment.

• Real Time VRMS Voltage Monitoring - displays real time True RMS voltage on all 16 OBDII pins
• Built In CAN Termination for Bench & ECU Testing - an onboard 120 ohm CAN termination switch is ideal for situations where termination is missing such as single ECU or small bench networks.
• Intelligent Voltage Protection & Audible Alarm System - reverse polarity protection, automatic alarms for over voltage and under voltage conditions, and support for currents up to 2A, ensures that both the vehicle and diagnostic tools stay protected during testing.

The 888 series are Sunflag's premium quality screwdriver series. These screwdrivers - made in Japan - feature Sunflag's famous soft grip handles, and hardened tip for long lasting performance. These screwdrivers also have a tang thru design, and a magnetised tip.

This screwdriver has a magnetised Tang-Thru blade which can be struck by a hammer.

• #2 Phillips screwdriver
• 200mm blade length
• JIS compliant

Crafted with meticulous Japanese engineering, the Sunflag 10-P Series Screwdriver is designed for fine-detail work where accuracy and control are paramount. Whether you're servicing electronics, working on delicate instruments, or assembling precision components, this tool delivers dependable performance in a compact form.

• Ultra-Fine Shaft: The slim 3mm shaft allows access to tight spaces and recessed screws without damaging surrounding components.
• Phillips Head (#00): Ideal for micro screws commonly found in electronics, cameras, and precision devices.
• 75mm shafft length

Premium quality Sunflag tang thru Phillips screwdriver, with heavy duty blade. The tang thru design allows the driver head to be struck with a hammer to help release the screw. Sunflag screwdrivers are made in Japan.

• 75mm blade length
• #1 Phillips
• Crystalline handle

This screwdriver has an extra long shaft for reaching into those hard to reach places. High quality with a hardened chrome vanadium steel shaft, and comfort grip handle.

• #2 Phillips screwdriver
• 730mm overall length

The Sunflag 666 series are designed for the professional user, who does not require the tang thru design of the 888 series driver.

Like all Sunflag tools, these drivers feature a precision tip, with Sunflag's famous soft grip handles for ergonomic use.

• #0 Phillips screwdriver
• 75mm blade length
• JIS compliant

The Sunflag 666 series are designed for the professional user, who does not require the tang thru design of the 888 series driver.

Like all Sunflag tools, these drivers feature a precision tip, with Sunflag's famous soft grip handles for ergonomic use.

• #0 Phillips screwdriver
• 100mm blade length
• JIS compliant