Jamec Style Adaptor
1/4" BSP
SKU: 10031M4
TECHNICAL
These couplings have 2 tab buttons for a more secure lock.
The new 2008 release GENUINE SONSBEEK 320 Series Couplings have been designed for the Industrial market.
Quality and performance.
Precision manufactured components.
Thread sealant applied to all male threads.
Anti corrosive silver Nickel plated.
INTERCHANGEABILITY
JAMEC 310/320
WORKING TEMPERATURE
-10°C up to +80°C—Buna N Seal
OPERATING PRESSURE
Safe working pressure to 250 PSI / 17 BAR
APPLICATIONS
Compressed air and pneumatic applications, but where only LOW flow rates are required.
SPECIAL PRODUCT:
Being one of our most popular ranges it has been imperative to introduce a 320 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection.
ASK US FOR MORE DETAILS
| SKU | 10031M4 |
| Barcode # | 9335111000962 |
| Brand | Sonsbeek |
| Product weight | 0.0240kg |
| Shipping weight | 0.024000kg |
| Connection | Male |
| Size | 1/4" |
| Style | Jamec Style |
| Thread | BSP |
| Type | Adaptor |
| Material | Steel |
Consumable
More from this category
Jamec Style Starter Kit
- 3/8" BSP adaptor
- 3/8" BSP coupler
- 15 - 18mm OTK style clips (2x)
Jamec Style Starter Kit
- 1/2" BSP Adaptor
- 1/2" BSP Coupler
- 17 - 20mm OTK style clips (2x)
Your browsing history
Impact Bit & Socket Driver Kit
Combined 1/4" hex bit holder and socket driver - with magnet.
- 3/8" & 1/2" Sq Drv
- 1/4" hex shank
VW Locking Wheel Nut Socket Set
A specialised master kit of pattern style wheel nut sockets. These are commonly used on late model VW vehicles. Socket sizes are labelled to correspond with OEM sizing. From #521 - #540. A similar kit is available with spline style sockets for older VW vehicles.
Do not use with an impact wrench.
- 20 Pce kit
- Pattern style
- OEM Equiv: T10313
Combination Wedge Tool
This combination wedge tool is designed for lifting bezel edges without marring interior surfaces, and for removing molded body trim pieces without damaging paint.
Also suitable for removing metal clips / plastic fasteners. Also for door, fender, hood and lid alignment. Made from high quality nylon.
- Made from high quality non-marring nylon.
Spark Plug Thread Chaser | 10 x 14mm
This spark plug hole thread chaser makes it easy to remove carbon, dirt, or straighten damaged threads in spark plug holes. Use with a deep socket, open end or box wrench.
- Tapered double ended design
- 10 x 14mm with 5/8Ò (16mm) hex
Holden Trimatic Selector Seal Tool
Designed to gain access for removal and replacement of the shift selector shaft seal on Holden rear wheel drive transmission. Works with transmission that have the neutral safety switch around the transmission shift selector which requires a longer tool to remove and replace the seal.
- Applications: TH180 / TH350 / TH400 / TH700 / 4L30E / 4L60E to 1995 / POWERGLIDE
- 5/8" drive size | 3/8-16 UNC-2B thread
- Remover bolt has a 9/16" head | 3/8-16 UNC 2A thread.