Locks the camshaft sensor wheel in position during timing & assembly of V8 VANOS engines. Includes left & right bank fixtures. Also suits Range Rover 4.4L V8 (03-05).

• Engines: M62 VANOS | Range Rover 4.4L (03-05)
• OEM Equiv: 303-1017 | 11 6 451 | 11 6 452

This kit contains a series of crankshaft turning / holding tools for 1.2L | 1.5L | 2.0L | 3.0L petrol and diesel engines. This kit has broad application to popular engines post 2014.

• Engine codes: B37 | B38 | B47 | B48 | B58
• OEM Equiv: 11 4 180 | 11 6 480 | 11 9 265 | 11 9 811

A versatile / time saving kit to press down the exhaust camshaft to allow for easy removal / installation. Also holds the bearing strips in place when fitting the intake camshaft.

• Engine codes: B58 | N52 | N54 | N55

A specialised kit for locking the flywheel when the transmission is removed from the vehicle. This kit suits BMWs with V8 | V10 | V12 engines.

• Engine codes: N62 | N63 | N73 | S85
• OEM equiv: 83 30 0 493 938

This BMW Fuel Injector Tool (OEM 2358417) is an essential solution for safely extracting and reinstalling fuel injectors on modern BMW petrol engines. Always use with a torque wrench, and follow manufacturer instructions.

For injector seal replacement refer ET1735B.

• Applications: - BMW 1 Series, 3 Series, 5 Series, X1, X3 | MINI Cooper, Clubman, Countryman from 2014 onward
• Engine codes: B38 | B48 | B58
• OEM Equiv: 83302385417 (2358417)

Holds vibration damper pulley when removing / installing the retaining bolt. ALSO suits Range Rover V8 4.4L (03-05).

• Engine codes: M60 | M62
• 47mm ID | 80mm OD

Locks camshaft & crankshafts on M60 & M62 Vanos & Non Vanos V8 petrol engines. It consists of 2 blocks, swivel lock plates & locking pin for setting camshaft timing. Also suits Range Rover / Land Rover V8 44 8S 2 4.4L (03-05) Single Vanos & Morgan Aero 8 M62 (00-04).

These plates are designed to check the camshaft position after insertion.

• Engines: M60B30 | M60B40
• OEM Equiv: 112430

Secondary chain tensioner locking springs for locking the camshaft chain tensioner.

• Engine: BMW M62

The ET1867A is a specialised crankshaft front seal replacement tool designed for BMW engines, including models B37, B47, B48, B57, B58, N47, and N57. It ensures precise and efficient seal installation, reducing the risk of damage during replacement. This tool is compatible with BMW OEM reference number 118 800

• Engine code: N47
• OEM Equiv: 118 800

Valve stem seals often become hard over time resulting in leaks between the stem and the seal. This time saving kit for specific BMW vehicles allows for seal replacement without the need to remove intake / exhaust cams saving both labour time, and avoiding the need to use expensive timing tools.

• Applications: N62 | N62TU

For securing inlet camshaft during installation in bearing bridge. Use in conjunction with ETN62 once heads are removed.

• Engine code: N62 | N73
• OEM Equiv: 11 9 470

This lever is used for applying tension to the valvetronic springs during servicing.

• Engine codes: N62 | N73
• OEM Equiv: 11 9 480

Air conditioning compressor belt installer for 4.0L | 4.4L V8 engines (without tensioner). Provides a damage free solution for installing these belts.

Also suit the Land Rover V8, and the R50 / R52 MINI Diesel

• Vehicles: BMW | Land Rover | Mini
• Engines: N62
• OEM Equiv: 641040

An oil filter cup wrench with specific application to certain BMW vehicles. Part of the Endeavour range of cup filter wrenches.

• Application: BMW N62 5/7 Series V8 engines (2004>).
• 24mm dia x 30mm deep.
• 3/8" Sq Drv

This kit contains hydraulic rams, pads and tubes to remove upper sub frame caster bushings for aluminium arms. A 10 tonne hydraulic pump (not included) is recommended to be used with this kit.

• Applications: E31 | E32 (31 12 1 136 607), E34 (31 12 1 139 456), E38 | E39 (31 12 0 006 482), E53 (31 12 1 096 372), E65 | E66 (31 12 0 303 754)

For screwing in chain tension with top right timing case cover removed. Use with camshaft chain pre-tensioner tool (ET1136-5). Also suits Range Rover 4.4L V8 (03-05)

• M22 x 1.5
• Engine code: M60 Vanos

Adjusts the VANOS unit to left hand stop during assembly and valve timing. Use with ET1021B. Also suits Range Rover 4.4L V8 (03-05).

VANOS electromagnetic (solenoid) valve socket. For 6 Cyl & 8 Cyl VANOS systems. Also suits Range Rover 4.4L V8 (03-05).

• Engine codes: M54 | M62
• 32mm deep socket