SKC


SKC Hex Die 1" AF

SKC Hex Die 1" AF

Hexagon die | 1" Across Flats

  • M12 X 1.25

SKC Hex Die Holder

SKC Hex Die Holder

High quality SKC die holder. Die cast body with steel handle. Made in Japan quality

  • Holds 1" AF hex dies
  • Handle length: 8-1/4" (210mm)
  • Part # S-1977

SKC Imperial Tap & Die Set SKC Imperial Tap & Die Set

SKC Imperial Tap & Die Set

A professional quality Japanese made tap & die set. Made from premium quality Japanese tungsten steel.

Contains National Coarse / National Fine taps & dies. With plastic storage carry case.

  • 17 Round Dies (1" OD) / 17 Plug Taps
  • 1 "T"Type Tap Wrench1/8-1/4(3M/M-12M/M)
  • 1 "T"Type Tap Wrench1/4-1/28(6M/M-12M/M)
  • Adjustable Tap Wrench (1/8-1/2)
  • 1 Screw Pitch Gauge
  • 1 Screw Driver
  • 4NC40 | 6NC32 | 8NC32 | 10NC24 | 10NF32 | 12NC24 | 1/4NC20 1/4NF28 | 5/16NC18 | 5/16NF24 | 3/8NC16 | 3/8NF24 | 7/16NC14 | 7/16NF20 | 1/2NC13 | 1/2NF20 | 1/8NPT

SKC Metric Tap & Die Set SKC Metric Tap & Die Set

SKC Metric Tap & Die Set

A professional quality Japanese made tap & die set. Made from premium quality Japanese tungsten steel.

This set contains sizes M3 - M12. With plastic storage carry case.

  • 3 0.5, 3 0.6, 4 0.7, 4 0.75, 5 0.8, 5 0.9, 6 1.0, 7 1.0, 8 1.0, 8 1.25, 9 1.25, 10 1.25, 10 1.5, 11 1.50, 12 1.25, 12 1.5, 12 1.75

SKC Metric Tap & Die Set SKC Metric Tap & Die Set

SKC Metric Tap & Die Set

A professional quality Japanese made tap & die set. Made from premium quality Japanese tungsten steel.

This set contains sizes M2 - M18 in coarse and fine thread. With metal storage carry case.

  • 2 0.4, 3 0.5, 4 0.7, 5 0.8, 6 0.75, 6 1.0, 7 0.75, 7 1.0, 8 0.75, 8 1.0, 8 1.25, 9 0.75, 9 1.0, 9 1.25, 10 0.75, 10 1.0, 10 1.25, 10 1.5, 11 0.75, 11 1.0, 11 1.25, 11 1.5, 12 0.75, 12 1.0, 12 1.25, 12 1.5, 12 1.75, 14 1.0, 14 1.25, 14 1.5, 14 2.0, 16 1.0, 16 1.5, 16 2.0, 18 1.5
  • 1 each of 1 OD and 1-1/2 OD Dies
  • 1 each of Taper Taps and Bottoming Taps
  • 1 each of Die Stock for 1 OD and 1-1/2 OD
  • 1 each of Adjustable Tap Wrench No.4 & No.6
  • 1 each of T Type Tap Wrench

SKC T Type Tap Holder

SKC T Type Tap Holder

Heavy duty spring type tap holder. With two jaws made from hardened & tempered steel. Made in Japan quality.

  • Capacity: 5/32" - 1/4" (M3 - M6)

SKC T Type Tap Holder

SKC T Type Tap Holder

Heavy duty spring type tap holder. With two jaws made from hardened & tempered steel. Made in Japan quality.

  • Capacity: 1/4" - 1/2" (M6 - M12)

SKC Tap Handle #4

SKC Tap Handle #4

Professional quality SKC adjustable tap wrench. Made in Japan.

  • Capacity: 1/16" - 3/8" (hand taps) | 1/8" (pipe taps)
  • Nominal size: 3/8"
  • Length: 9"

SKC Tap Handle #6

SKC Tap Handle #6

Professional quality SKC adjustable tap wrench. Made in Japan.

  • Capacity: 1/4" - 3/4" (hand taps) | 1/8" - 3/8" (pipe taps)
  • Nominal size: 3/4"
  • Length: 15"

SKC Taper Reamer #1

SKC Taper Reamer #1

High quality taper reamer constructed from high speed Tungsten steel. SKC Taps & Dies are made in Japan for professional use.

  • 1/8" - 1/2" capacity
  • Diameter large end: 1/2"
  • Diameter point: 1/8"

SKC Taper Reamer #2 SKC Taper Reamer #2

SKC Taper Reamer #2

High quality taper reamer constructed from high speed Tungsten steel. SKC Taps & Dies are made in Japan for professional use.

  • M3 - M16 capacity
  • Diameter large end: M16
  • Diameter point: M3

SKC Taper Reamer #3

SKC Taper Reamer #3

High quality taper reamer constructed from high speed Tungsten steel. SKC Taps & Dies are made in Japan for professional use.

  • M4 - M22 capacity
  • Diameter large end: M22
  • Diameter point: M4

SKC Taper Reamer #4

SKC Taper Reamer #4

High quality taper reamer constructed from high speed Tungsten steel. SKC Taps & Dies are made in Japan for professional use.

  • M4 - M32 capacity
  • Diameter large end: M32
  • Diameter point: M4

Tap | M4 x 0.75

Tap | M4 x 0.75

SKU: M4X0.75-TAP