Body & Chassis

A set of four general purpose nylon scrapers which are ideal for delicate tasks such as removing badges, stickers etc, without damaging the surface.

• Blade widths: 20, 23, 25, 38mm
• Overall length: 270mm

Hook set suitable for removing o-rings, sealing rings, rotary shaft seals etc. The rounded tips avoid damaging / scratching components. And can be used to help push hoses over flanges (for instance, on turbochargers).

• 2x straight (short & long)
• 2x offset (short & long)
• Blade length: 60mm & 135mm

A really handy 4 piece miniature pick & hook set ideal for marking, picking, seal removal etc. This is a premium quality kit with heat treated alloy steel shafts, and comfort grip handles.

These tools have a wide range of automotive / industrial applications.

• Pick - angled tip 45 degrees
• Straight awl
• Hook
• Pick - angled tip 90 degrees

A handy set of plastic wedges for various bodywork tasks. The plastic wedges avoid damage to the car's paint work. Applications include the removal of mouldings / door coverings, and the application of plugs and plastic clips.

• Uni assembly wedge (190 x 30mm)
• Assembly wedge with felt surface (250 x 20mm)
• Spike assembly wedge (250 x 20mm)
• Uni wide assembly wedge (190 x 60mm)
• Special level assembly wedge (230 x 30mm)

Designed for removing timing belt covers, but with broader applications including oil drains, and panel / trim removal. Made from quality composite plastic, to avoid damage.

• 4 Pce

Plastic rivets are commonly used on car carpets, seats and trims. This set includes a gun for applying the plastic rivets, along with 40 plastic rivets.

Replacement rivets are available separately.

• 5mm x 15.8mm (10 pce)
• 6.6mm x 17.2mm (10 pce)
• 5mm x 17.2mm (10 pce)
• 6.3mm x 25.2mm (10 pce)

Plastic rivets are commonly used on car carpets, seats and trims. This set includes a right angle gun for applying the plastic rivets, along with 40 plastic rivets.

Replacement rivets are available separately.

Removes pressed on single / double groove pulleys. Also removes alternator bearings.

• Openings: 1-1/4" & 1-3/4"
• 7" (180mm) OL

Comprehensive kit for servicing pulleys on Ford | Holden | Chrysler vehicles with Saginaw | Thompson | Ford C111, C2 power steering pumps. Also suitable for harmonic balancers, gear pulleys, flywheels etc.

• 1-1/8" | 1-1/4" | 1-5/16" | 1-3/8" pulley hub diameters.
• Includes pulley installer / remover and quick disconnect coupler tool.

Fits puller adapters threaded 5/8"-18 UNF. 26" long

A comprehensive slide hammer kit for the removal of front / rear hubs, flange type axles, and bearing oil seal bushes.

The kit includes a slide hammer with various attachments including a 2 and 3 jaw internal and external puller, and front and rear hub pullers

• 2.3kg slide hammer | 580mm shaft

Quality alloy steel double ended blade custs perfect holes in most materials. Includes a 1/4" arbor with retractable pilot to ensure an accurate cut. For use with all 1/4" or larger variable speed drills.

• 3/8" Spotweld cutter
• 75mm overall length

Genuine Sunflag - made in Japan - clip removal set, ideal for damage free removal of trim and clips. Made from special hardened steel.

• Hardened shafts
• Jaw openings: 5-7mm & 6-9mm

A T47 Torx bit for Ford seat belt anchors

• T47 Torx bit
• 5/16" hex drive

Part of the Endeavour Tools range of specialised Torx sockets. The T80 (Sec) size is commonly used to remove / install the wiper linkage assembly on BMW E31 | E38 | E39 vehicles.

Use in conjunction with ET1138A.

• Torx T80-H bit socket
• 100mm overall length
• 1/2" Sq Drv
• Applications: BMW E12 | E21 | E23 | E24 | E28 | E30 | E31 | E32 | E34 | E36 | E38 | E39

Essential workshop tools for removing / fitting interior and exterior trim clips.  Made from durable nylon to reduce risk of damage to dashboards, door panels, mouldings, trims etc

• Remove upholstery, trim, trim studs etc
• Angle | straight | wide | narrow | forked | tapered applications
• Impact resistant high quality nylon

This trim removal kit has a variety of different designs to removal clips / trims, plus a wheel balance weight removal tool with cutter.

• 4 piece kit
• Plastic construction to avoid damaging surfaces.

Universal kit ideal for removing moldings / trims from almost any vehicle. Includes 11 removal tools, plus a mini trim hammer.

• Made from nylon to minimise panel damage / marking
• Supplied in heavy duty storage pouch

Sturdy plastic construction with two suction pads, with individual lever operation. Ideal for heavy lifting applications.

• 70kg lift capacity

Pull out panel dents safely & easily. Swivel handle permits pulls with chain & pick. Lift lipped edge to release vacuum.

• 6" (150mm) diameter cup.

A special tool for removing accelerator pedal modules in VAG vehicles that are fitted with a drive by wire system, rather than accelerator cable.

This release tool is for right hand drive vehicles.

• Models: VAG range from 2004 onwards
• OEM Equiv: T10240

Specialised tool for releasing the 12V cigarette lighter socket on various Audi & VW vehicles. This tools helps to depress the clips without damaging the centre console.

• OEM Equiv: T40148
• Applications: Audi A4 (01) | A4 (08) | Q5 (08) | A6 (05) | Q7 (07)

An essential tool for safely removing the exterior door handle on a range of Audi / VW vehicles.

• Applications: VW Caddy (2016>) | Passat (2015>) | Tiguan (2016>) | Touran (2016>), Audi Q2 (2016>)
• 12.75mm x 3.5mm profile x 14.5mm long
• OEM Equiv: T10539

Designed for supporting the engine while removing the transmission on VW T4 vans with 4 and 5 cylinder engines.

For the removal / installation of the clutch and gearbox on the VW T4 it is essential to support the engine. After undoing all mounting bolts, loosening the exhaust flange and removing all connections, the engine must be lifted and pulled / pushed to the right front side until the pulley of the camshaft is almost in contact with the frame. Only them will it be possible to remove the gearbox and change the clutch.

A special tool for the removal and installation of the lock cylinder housing on doors where no key barrel is fitted.

• Applications: Golf VI (>08) | Passat B6 (3C) (>05) | Q7 | Tiguan (>08)
• OEM Equiv: T10389

A specialised locking cylinder installation tool for key patterns with internal spring. Allows for fast repair to the door look on selected VW models.

• Applications:Beetle | Lupo | Golf IV (not Golf Cabriolet) | Passat) as well as SEAT / Skoda.

Simply slide between window exterior and door, with the channel facing the door. Pull to remove molding without damaging it, or the painted surface of the door.

A time saving tool.

This special tool assists with the removal of windscreens. Use the cable pull handle to cut the caulking compound around the glass. The strong tempered blade can be resharpened / replaced.

• Aluminium handle
• 8-5/8" (220mm) long

Doubled ended tips for inserting the locking strip around windshields & other windows on most cars.

Just select the tip that most closely fits the locking strip, then feed locking strip into the eyelet.

• 190mm overall length

Two essential windscreen maintenance tools. Universal, adjustable puller, and needle for unblocking / redirecting jets.

• The special forcing screw cap helps protect wiper arms that have a nozzle.

Reduce the risk of damage to wire insulation. Allow users to push, pull, feed wires. Plus prying & opening panels etc.

• Assisting with placing / extracting cables.
• Allow prying open control panels, inspection covers etc