Professional mini polisher kit. Adjustable speed regulator to match speed to the job.

• 2,500 RPM
• 1/4 - 20 UNC Spindle
• Supplied with backing pad plus buffing pad, and white / yellow compounding pads

When working on diesel fuel systems, it is important to avoid allowing dirt to enter the fuel system. These plugs seal off the fuel rail, and also allow individual injectors to be blanked off to allow diagnosis of fuel system pressure loss.

• Internal thread sizes: M12 x 1.5mm (6 pcs) | M14 x 1.5mm (6 pcs)
• Applications: Bosch | Denso | Delphi | Siemens injectors
• Fits most common rail injection rail sizes.

Specialised wrenches for servicing the diesel filter / sensor on Mazda SkyActiv-D2.2 engines.

• Engines: SH-VPTS | SH-VPTR
• Applications: CX-5 | CX-8 | Mazda 6 (Atenza) | Mazda 3 (Axela)
• Fuel filter wrench: 85mm x 15F
• Sensor wrench:50mm x 8F
• 1/2" Sq Drv

A stable power supply is essential when flashing / reprogramming / calibrating ADAS. This unit outputs 120A indefinitely, with variable voltage. Plus functions as a 120A battery charger.

IMPORTANT SAFETY NOTICE: This unit must be connected to a 15A circuit. The power cord supplied with the ET6102 must be used with this unit. This 15A cord has a larger earth pin.

Grinding down the earth pin to suit a standard 10A outlet or using an alternative cable with a 10A plug will damage the unit and void the warranty.

Based in Kansas USA, Clore has a 50 year heritage in developing battery technology for automotive professionals.

• 120A battery stabiliser
• 12 / 24V operation
• 120A / 40A / 10A battery charging modes
• 13ft Cables
• 120A Max Output For Both Car / Truck Applications
• Extremely Low Peak To Peak Ripple Voltage
• Adjustable Voltage Output
• 7-Phase Battery Charging Sequence
• No Voltage Drop
• Lead Acid Plus Lifep04 Batteries

The next generation of Super screw cam clamps featuring innovative new safety features.

• Built in spring for extra clamping force on items being lifted.
• Visual clamping force indicator - lines align to indicate that the clamp is correctly tightened.

Super clamps are made in Japan for professional use. Screw cam clamps are ideal for lifting, turning, and pulling over.

• 0.5 Tonne capacity
• 0 - 25mm clamping range

The next generation of Super screw cam clamps featuring innovative new safety features.

• Built in spring for extra clamping force on items being lifted.
• Visual clamping force indicator - lines align to indicate that the clamp is correctly tightened.

Super clamps are made in Japan for professional use. Screw cam clamps are ideal for lifting, turning, and pulling over.

• 1 Tonne capacity
• 0 - 40mm clamping range

The next generation of Super screw cam clamps featuring innovative new safety features.

• Built in spring for extra clamping force on items being lifted.
• Visual clamping force indicator - lines align to indicate that the clamp is correctly tightened.

Super clamps are made in Japan for professional use. Screw cam clamps are ideal for lifting, turning, and pulling over.

• 2 Tonne capacity
• 0 - 40mm clamping range

The next generation of Super screw cam clamps featuring innovative new safety features.

• Built in spring for extra clamping force on items being lifted.
• Visual clamping force indicator - lines align to indicate that the clamp is correctly tightened.

Super clamps are made in Japan for professional use. Screw cam clamps are ideal for lifting, turning, and pulling over.

• 3.2 Tonne capacity
• 0 - 40mm clamping range

This screw cam clamp can be used for a variety of operations such as lifting up and down, lateral pulling and turning over.

• This clamps has a screw and circular cam (special spring loaded) which provides positive clamping force on a load even when vibration offurs during operation.
• Cam holder and collar respectively have phosporescent paint for visual recognition of adequate tightening.