Specialised heat shrink tip for the ETPRO-30 rechargeable soldering iron. This tips allows the ETPRO-30 soldering iron to be used as a flamless heat gun for heat shrink applications.

These colour coded gauges help identify brake lining that may require replacement. Quickly assess brake pad thickness on disk brakes, by inserting the blade between the brake disc and brake pad.

Traffic light like colour coding - Green / Go, Yellow / Caution, Red / Replace

• Colour coded metal gauges
• Measuring range: 2mm - 12mm

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

An essential tool for every mechanic! Quickly / safetly removes wires from connectors, avoiding damage to wires and connectors.

• Fork for ALDL connectors
• Flat blade to open
• Rectangular for pack-con terminals
• Prongs depress barbs on standard terminals

High speed / small body die grinder for demanding industrial applications where there is restricted access. Throttle lever with safety lock. Rear exhaust. Compact / lightweight / ergonomic design with made in Japan quality.

• Collet size: 1/4"
• Free speed: 25,000 RPM
• Air Consumption: 2.7CFM
• Optional collets: 1/8" | 3mm | 6mm

Professional one person brake and clutch bleeding. Simply connect the adaptor to the master cylinder, fill the container with brake fluid, and pump. No external power source is required.

• 2.8 litre capacity
• Supplied with 44mm adaptor (ETWH500BC-06) that suits many European (and BYD) vehicles
• Other adaptors available separately

Our most powerful unit yet - now with 50W soldering power - for the most heavy duty tasks.

• 10 second fast start
• 45 minutes continuous runtime
• 5mm chisel tip / 1.5mm cone tip / heat shrink tip
• Packaged in plastic case with EVA tray

Introducing a new range of rechargeable soldering irons for more aggressive soldering needs. Featuring 80W soldering power - a 50% step up over our existing range. Extra large 2,400mAh Li-Ion battery allowing for extended use. Fast start up, and fast cooldown for more efficient / safer operation. Charging time 2.5 - 3 hours.

• 80W Chisel type tip
• 80W Cone type tip
• 90W Heat Shrink tip
• 90W Hot Knife
• 650 deg C max temperature
• Battery power indicator
• LED lights for illumination
• 17 tips available separately

Industrial version suitable for most automotive / industrial tasks.

• 10 second fast start
• 45 minutes continuous runtime
• Includes fine point | chisel | hot knife
• Packaged in plastic case with EVA tray