The Power Probe 3 with PowerFlowª Technology is built for technicians who need faster, more confident electrical diagnostics on 12V and 24V vehicle systems. It combines the trusted functionality of the Power Probe 3 with advanced circuit-loading capability, allowing technicians to measure voltage, apply battery power or ground, check resistance, activate components, and verify circuit integrity under real-world load conditions. With PowerFlowª, hidden faults such as high resistance, corrosion, weak grounds, and excessive voltage drop can be exposed quickly Ñ helping reduce guesswork, avoid unnecessary parts replacement, and speed up every diagnostic job.

• PowerFlowª Circuit Loading Technology - Actively load positive or negative circuits to test wiring under real operating conditions. PowerFlowª helps reveal voltage drop, high resistance, weak grounds, corrosion, damaged wiring, and poor connections that may not appear during standard no-load voltage testing.
• Apply Battery Power or Ground - Quickly supply 12V or 24V battery power or ground directly to components for fast functional testing. Ideal for checking motors, lights, relays and other electrical components.
• Resistance Measurement up to 25 k - Measure resistance to help verify component specifications, identify poor connections, and locate high-resistance faults caused by corrosion, damaged wiring, or component degradation.
• 10A Solid-State Circuit Breaker - The integrated 10-amp solid-state circuit breaker provides protection while supporting higher-load component testing. It allows technicians to power demanding loads with added confidence and automatic reset protection.
• Built-In Electronic Latch Function - Apply continuous power or ground without holding the actuator switch. This is especially useful for extended component activation, dynamic troubleshooting, and hands free testing.
• Quick-Connect Ground Lead - The ground connection uses a 4mm banana jack for improved flexibility and reliability. It allows the use of extensions, adapters, and test leads while maintaining a secure ground connection.

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 330 x 270 x 150mm
• 40kHz frequency
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

The ET8626 is a professional battery and charging-system tester designed for fast, accurate assessment of all 12V automotive lead acid cranking batteries - including modern stop-start types, and for evaluating 12V and 24V alternator and starting system performance. This tester delivers clear, reliable diagnostics in seconds, and the built-in thermal printer allows you to produce instant test reports for customer records or workshop documentation.

• Compatible With All Major Battery Standards - accurately tests batteries across all common industry standards, ensuring reliable results whether you're working with automotive, commercial, marine, or deep cycle 12V batteries.
• High Load Voltage Testing for 12V & 24V Systems - maximum load voltage tests on both 12 volt and 24 volt electrical systems, making it suitable for cars, trucks, machinery, and mixed fleet applications.
• Built In Short Circuit & Reverse Polarity Protection - integrated safety features to prevent damage to the tester and the battery, even if connections are made incorrectly.
• Wide 100–2,000 CCA Testing Range - enabling accurate assessments of everything from small passenger batteries to heavy duty commercial units.

A stable power supply is essential when flashing / reprogramming / calibrating ADAS. This unit outputs 100A indefinitely, with variable voltage. Plus functions as a 60A battery charger.

Based in Kansas USA, Clore has a 50 year heritage in developing battery technology for automotive professionals.

• 100A battery stabiliser
• 13.1V - 14.9V (0.1V increments)
• 60A / 40A / 10A battery charging modes
• Extremely low peak to peak ripple voltage
• Adjustable voltage output 13.1~14.9v
• 7-phase battery charging sequence. 60A / 40A/ 10A modes
• No voltage drop
• Quick response time 8x faster than competing models
• Clean, stable power perfect for reprogramming
• 13 Ft Cables
• Winner of Motor Magazine Top 20 Tools award 2020

The Power Probe 3 with PowerFlowª Technology is built for technicians who need faster, more confident electrical diagnostics on 12V and 24V vehicle systems. It combines the trusted functionality of the Power Probe 3 with advanced circuit-loading capability, allowing technicians to measure voltage, apply battery power or ground, check resistance, activate components, and verify circuit integrity under real-world load conditions. With PowerFlowª, hidden faults such as high resistance, corrosion, weak grounds, and excessive voltage drop can be exposed quickly Ñ helping reduce guesswork, avoid unnecessary parts replacement, and speed up every diagnostic job.

• PowerFlowª Circuit Loading Technology - Actively load positive or negative circuits to test wiring under real operating conditions. PowerFlowª helps reveal voltage drop, high resistance, weak grounds, corrosion, damaged wiring, and poor connections that may not appear during standard no-load voltage testing.
• Apply Battery Power or Ground - Quickly supply 12V or 24V battery power or ground directly to components for fast functional testing. Ideal for checking motors, lights, relays and other electrical components.
• Resistance Measurement up to 25 k - Measure resistance to help verify component specifications, identify poor connections, and locate high-resistance faults caused by corrosion, damaged wiring, or component degradation.
• 10A Solid-State Circuit Breaker - The integrated 10-amp solid-state circuit breaker provides protection while supporting higher-load component testing. It allows technicians to power demanding loads with added confidence and automatic reset protection.
• Built-In Electronic Latch Function - Apply continuous power or ground without holding the actuator switch. This is especially useful for extended component activation, dynamic troubleshooting, and hands free testing.
• Quick-Connect Ground Lead - The ground connection uses a 4mm banana jack for improved flexibility and reliability. It allows the use of extensions, adapters, and test leads while maintaining a secure ground connection.

A replacement high voltage safety fuse designed specifically for the Power Probe DM300AUTO Digital Multimeter. Rated at 11A, 1000V AC/DC, and 10kA breaking capacity, this fast-blow ceramic fuse provides critical protection for the meter's low current measurement circuits, helping prevent damage from overloads and fault conditions.

• 11A Rating
• 1,000V AC / DC
• 10kA breaking capacity

The Power Probe TST12V Mini Probe is a 12V cigarette outlet tester designed to quickly check your vehicle's power outlets. It illuminates when power is present, saving time by eliminating the need to search for phone charger cables. This compact and efficient tool is ideal for verifying current flow in accessory sockets.

The Power Probe PPTK0029 is a 20-foot extension cable designed for use with the Power Probe 4 and Maestro diagnostic tools. It extends the reach of your Power Probe, making it ideal for testing electrical circuits on larger vehicles and trailers. This high-quality cable ensures consistent power delivery and secure connections for accurate diagnostics.

A replacement high voltage safety fuse designed specifically for the Power Probe DM300AUTO Digital Multimeter. Rated at 2A, 1000V AC/DC, and 10kA breaking capacity, this fast-blow 6 32mm ceramic fuse provides critical protection for the meter's low current measurement circuits, helping prevent damage from overloads and fault conditions.

• 2A Rating
• 1,000V AC / DC
• 10kA breaking capacity

The Power Probe PPTK0027 is a 20 foot extension cable for use with Power Probe 3 and 3EZ diagnostic tools. It extends the reach of your Power Probe, making it ideal for testing electrical circuits on larger vehicles and trailers. This high-quality cable ensures consistent power delivery and secure connections for accurate diagnostics.

• 20 foot extension cable
• Original part # PN3049

This clip set allows the Power Probe 3 circuit tester to be powered from any 12V source. Suits all Power Probe 3 models only.

• Original part # PN3046