A workshop quality touch control ultrasonic cleaner. This larger size is ideal for cleaning manifolds as well as smaller parts. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 500 x 300 x 200mm
• Dual 33kHz (coarse) / 40kHz (intensive) frequency
• 600W ultrasonic power / 500W heating power
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer (1-99 minutes working time)
• Digital temperature setting (0-80 degrees C range)

• 1 teaspoon per litre of water
• High alkaline, double cleaning power for all metals.
• Ideal for the automotive industry to clean alloy & steel parts.
• No chromates
• Biodegradable

Testing brake fluid boiling point is widely regarded as the most accurate method of testing brake fluid moisture levels.

This compact unit tests DOT3 | DOT4 | DOT5 | DOT5.1.

• LCD display provides step by step instructions
• Accurate results displayed in less than sixty seconds.
• Operates on 12V supply, using vehicle's battery

This pen-style tool tests the percentage of water in brake fluid and evaluates key chemical profiles essential for modern brake fluids. The updated version now supports five fluid typesÑcovering both traditional DOT variants and ENV (Bosch). Ideal for quick and reliable brake fluid checks.

• Colour coded LEDs indicate percentage of water in the brake fluid
• Compatible with DOT 3 | DOT 4 | DOT 5.1 | ENV4 (Bosch) | ENV6 (Bosch)
• Not suitable for silicone-based DOT 5.0
• AAA Battery included

A master brake pressure test kit suitable for ABS / non-ABS systems, as well as Ford (Teves) and Bosch systems. The kit contains two 3,000 PSI pressure gauges, and a comprehensive range of adaptors.

The two gauges can be used to take simultaneous / comparative readings of brake pressure for both front / rear brakes, as we as testing primary vs secondary pressure.

• Test for leaks / restrictions with the hydraulics of brake systems.
• 3,000 PSI (200 Bar) pressure gauges.
• 22 pce adaptor set

This pen style tool tests the percentage of water in brake fluid, and tests all essential profiles for modern brake fluids. Please refer to the DOWNLOAD tab for a detailed instruction sheet.

• Colour coded LEDs show water level
• DOT 3 | DOT 4 | DOT 5.1
• Not suitable for silicone based DOT 5.0
• Rechargeable Li-ion battery